Question about Saeco Magic De Luxe Espresso Machine

3 Answers

Saeco Magic comfort

My machine was going along fine this morning when suddenly it made a funny noise and then displayed ventilate.  I can't find anything in the manual for ventilate so don't know what I should do. I turned machine off & totally cleaned it but still came up ventilate when I turned it back on. Please help

Posted by casjertim on

  • 3 more comments 
  • Gisela Nov 13, 2007

    Hello...I am having the same problem...after descaling the machine the word ventilate suddenly displayed and no matter what I try it won't go away...meanwhile the machine is not working...I have tried turning it on and off, unplugging it...ventilating many times, cleaning...but the descale cycle now is not working either....tried going into menu and resetting some of the menu items...the display always returns to ventilate....we can't get it repaired because we were given it as a gift in Europe and are now in Canada....

  • ant17 Dec 29, 2007

    steam runs out and ventilate message appears.

  • Anonymous Jul 21, 2008

    While I was away on vacation, the water tank went dry and now the Saeco machine reads "Ventilate." I understand this means prime the pump, but I do not know how to do this and cannot find it in the booklet.



    Help?

  • Anonymous Feb 02, 2009

    It says Ventilate. And will not go away so the machine will not work.

  • Sury Hiestien
    Sury Hiestien Mar 01, 2017

    What must i do to handle it?

×

Ad

3 Answers

Sury Hiestien

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have the same problem

Posted on Mar 01, 2017

Ad

Anonymous

Thanks a lot, it works!

Posted on Jun 04, 2008

Ad

Anonymous

Turn the hot water / steam knob on to 'ventilate' the pressure from the machine. The ventilate /overtemperature message will disappear when ready (few seconds usually)

Posted on May 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 gmc Yukon makes a ticking funny noise when I first crank it in the mornings and it lasts about 3 Sec then return to normal..and a washing machine sound is coming from under the right driver side...


Balncer pulley or the other pulleys take the belt off and start it and see if does the same. The ticking noise you should see where it comes from when you take the belt off

Mar 06, 2013 | Cars & Trucks

1 Answer

Machine worked fine last night. This morning spin not working. Have tested it empty, put it in spin program, a funny clicking noise and then nothing, then after a while indicator shows 01 - ie. finished!...


n most washers the F01 error indicates an control board problem. It is like an internal program error.

A power glitch can cause the problem.

One of the things to try is to enter and run a diagnostic cycle, or unplug the machine for 30 mins.

Jan 24, 2011 | Bosch Classixx WFO 2866 Front Load Washer

1 Answer

My machine wasn't used for a while and the "VENTILATE" message appears. I followed the instructions in the manual as I have done before but no hot water runs when pressing the button 26 and the...


I have just had the same thing this morning with my machine (not used & ventilate message). I followed the instructions & found the same as you, then I realised I had not turned the knob to dispense the water!! Try this, it does take a while for it to go through the ventilate process, I had to refill the watertank. Good luck

Jan 15, 2011 | Gaggia Titanium Espresso Machine

1 Answer

I have a GE Spacemaker xl1800 - Funny noise, flickering light


very possible your magnatron is faulty. Disconnect 2 transformer wires and make sure they dont short. try the program again. if no noise, replace magnatron:capacitor and HV diode Please i strongly suggest an electrician help you as it is truely dangerous in there. .

Sep 15, 2009 | Microwave Ovens

1 Answer

My machine will not sew


When sewing anything that is rubberized you should use silicon spray this will help the fabric move along and will keep the needle from accumulating the rubber buildup and sticking in the bobbon casing.

May 20, 2009 | Sewing Machines

1 Answer

New Royal espresso machine


Run hot water cycle to ventilate machine.

Mar 09, 2009 | Saeco Magic Comfort Plus Espresso Machine

1 Answer

Laptop was working fine, suddenly went totally black.


the display of ur laptop has got damaged....if u still have doubt that it might be some software problem try formatting ur system.. Or else u should go for a change of display screen

Feb 02, 2009 | Toshiba Satelite A135-S4467 Notebook

2 Answers

GE JKP45 double wall oven shuts off


This sounds like a loose connection (solder joint) on the main control board. I had one that had a similar problem. checked the price of a control board $350. I took the control panel off, took the board apart and found a loose connection on one of the relays. resoldered the bad connection. oven works fine now.

Nov 07, 2008 | GE JKP45 Electric Double Oven

Not finding what you are looking for?
Saeco Magic De Luxe Espresso Machine Logo

1,978 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

espressofixr

Level 1 Expert

17 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...