Bsnl broadband modem

SOURCE: help for web connection

it looks like the BSNL Tyope two wireless has also a built in router with wireless security. the wireless has to be configured with a SSID (Service Set Identifier) and a password to be on the safe side with your wireless (password protected). the SSID is the name of your wireless in your wireless router (you can pick a custom name just make sure you change the default name). once the SSID is configured together with the SSID broadcasting, when you look for wireless networks with your laptop you should see your custom SSID. just double click on it and enter the password you set in the step before.

SOURCE: how to configure paradign modem adsl2 6211-A3-304 in bridge mode for BSNL Dataone Broadband connection

I belive with this modem you will:
1.Access the interface, generally http://192.168.1.1/
2. Go to Advanced on the left.
3. Select WAN.
4. Now you may see several rows of info, look for the one that says PPPoE, and then click edit to the far right.
5. Select Next one time.
6. Here select "BRIDIGING".
7. Click next all the way to the end.
8. Reboot, after you clicked save of course.


This is how you bridge 98% of PPPoE providers with a similar paradign modem.

Of course the next device in line will have to provide your username and password for your DSL connection.


Hope this helps!

SOURCE: BEETEL 220BX ROUTER

First login to your Router using default username and password
2. Click on WAN on the left side menu
3. You'll have options to add or remove configurations.
4. Please select and remove the bridge config as BSNL does not support Bridge.
5. Please click edit on the existing PPPoE Airtel Configuration
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next
7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next
8. Enter the following details:
PPP Username: Your bsnl username (no need to add dataone.in)
PPP Password: Your bsnl password
PPPoE Service Name: DataOne
Authentication Method: Select CHAP
Click Next
9. Check the Enable IGMP Multicast Option
Check Enable WAN Service Option
Enter the Service Name as Dataone
10. Click Next and Save. You should also save and reboot your modem.
If doing the above does not works, check if you have anything set Under TR-069 Client and remove all entries in this section however it may not allow you to save so you may just put the ACS URL as ( it won't accept this field to be blank so just enter any thing, I entered http://bsnl). Save and reboot the router. Should be online now.
let me know if anyone benefited from the above information - [email protected]

pankaj rautela

• 1252 Answers
• Posted on Oct 13, 2008

SOURCE: dataone bradband modem

check all the cable connections, and also reset your broad band router

SOURCE: wireless radio turs off automatically

I have forgotton and need to reset the Bios password on a Tecra L2 S011 Labtop, can anyone help.