I have a Sony Triniton flat screen 35in TV from 2002 and the green coloring is missing from the tv. The picture is good and the TV is still usable. Is there an RGB converter I could use? or any other inexpensive ways to address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Use the remote control to go into your TV picture settings menu and change the mode to NATURAL. It's also a good idea to check that all of your cables are in good shaped and tightly connected.
The green color could signify that your TV is magnetized. This can cause colors to draw out to the corners of the screen. Remove any magnetizing devices, like speakers, away from the TV and see if that helps.
For more solutions, read the troubleshooting steps outlined in TV color problems. I hope this helps!
Hi, how is the cable box hooked up to the TV? Is it HDMI cable or componet (red/green/blue) ? When you say totally green, do you mean the the picture is only green with the other colors missing or every color looks green ?
For the last week my TV has been going to a black screen for 10 seconds or so then the picture returns. It has been continual. Last night it stopped going to black screen, but now the standby light flashes 5 consecutive times and the color went haywire. A lot of red and everything that is suppose to be black is green.
I did a soft and hard reset with no success. What's wrong and is it worth fixing? Bought new in November 2002.
Problem solved. I tried playing DVD and the TV picture was fine. So I double-checked cable wires from cable box - one of the wires was loose (obviously it was the red color input). After tightening, the TV picture is good as new.
Buddy, Not a problem for the average Home Technician. Unless you are good at Solid state Electronics service. Problem is faulty Red Outpuit Transistor or associated components. Best to seek professional hellp.