Ok first i just wanna prepare ya on how bad your gonna kick yourself on
this one, i have a used one and dont really use honestly i hate
it...but i decided to mess around with it and decide to get sumthing
decent and bring it to the comp for the first time...and i seen i had
the same issue.. and saw that alot of people did to and they went on
and on with no solution...so i gave myself 5mins to think and
remember....and here ya go you ready... after you save all your songs
correctly to get them ready for export...step 1.plug it into your usb
port...step 2. ignore the fact that its not being noticed by
windows...step 3. go to menu on ur tascam scroll down to disk hit
yes/enter.step 4..now ur in the disk menu and right there the third
choice..usb open/close hit enter and there ya go you will be prompt to
open the usb port and everything is done your ready to go...when ur
done u close the port...basicly an on and off switch for the usb
port...i hope it helps and its not too late...good luck..oh it should
be in the manual under usb...thats how i remembered it cause i
remember reading it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Refer to your manual (1st) It appears that "maybe" your unit may be
locked - until you get through the menus - and type/press EXIT.
If you don't have a red indicator light - lit. Turn off power switch (rear)
and unplug unit for 1 minute. Plug in - then turn on switch (rear)....if
still no red indicator light....you'll need either Tascam or Samsung
tech to service your unit. Good Luck.
Alternatively you could load your stereo instrumental track into a wav editor, then export each stereo track as a separate mono wav file which you can transfer via usb into you DP-01 and then on you DP-01 import those wav files into two separate tracks which you can pan hard left and hard right so they are in stereo.