Question about Saeco Stratos Coffee Maker, Espresso Machine
Posted by Anonymous on
When it says to ventilate, it is asking you to prime the pump. Put acup
under the panarello wand ( the steamer/frother) to catch thedischarged
water and press the hot water button (upper left button onmy machine).
Wait until air stops coming out with the water, usually3-5 ounces, and
then press the hot water button again.
You machine is now ventilated (primed) and should be ready to go.
Posted on Jan 24, 2009
run hot water from the steam nozzel (for few seconds) to purge the air out of the system
you propabably ran out of water making your previous coffee?
Posted on Apr 10, 2009
HI Sorry, but that sounds like a bad flow meter. The flow meter is not that hard to replace, with a little common sense, but the new flow meter should be the brass one. There are some tricks to getting the top back on, Pull forward on the bypass doser chute a little so it will center in the opening. You don't have to disconnect all the wires that go to the top. They are long enough that the top will set behind the machine carefully. Remember the tubes that go to the flow meter. You don't want to get them backwards.
Posted on Jun 14, 2009
Tips for a great answer:
Mar 03, 2011 | Gaggia Titanium Espresso Machine
May 20, 2010 | Saeco Stratos Coffee Maker, Espresso...
May 01, 2010 | Gaggia Titanium Espresso Machine
Feb 20, 2010 | Saeco INCANTO DELUXE Espresso Machine
Jan 24, 2010 | Saeco Magic Comfort Plus Espresso Machine
Jan 22, 2010 | Saeco Royal Professional Espresso Machine
Jul 04, 2009 | Gaggia Titanium Espresso Machine
May 29, 2008 | Saeco Royal Professional Espresso Machine
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: