The red gun on my Zenith R57W46 rear projection tv is not lining up properly. I was told I could replace two IC's to try to fix the problem. Could you give me more details or your suggestions for a solution. I tried the auto convergence from the menu and it didn't fix it. green and blue boxes look good during the test but the red ones are all bent out of shape. Do you know the IC numbers and where I could get them? Thanks.
288 views
Usually answered in minutes!
I have a zenith tv model # r57w46, & serial # 421-630-70422. We just had it fixes and it took 5 weeks to get. The repairman re. do. mainunit and HV block. THe problem we are having now it we have red and green lines like on the face. it has like on the writhing it has the same writing but in red or green & it is wrote like starting under the regular writing and then it go up over the regulae writing. Would that have any thing to do with the problem now. It cost us $415.00 to get that done. I would appreciate it if you could help me. This is our first zenith tv and it is only 3 years old.
Thank you
Kathy Maynor
Have them same problem..Is his a call back or what?
I have red lines too-they start at the left and kinda swirl up through the picture and gives a double look to the pic too. What can be done and is this worth fixing?
Thanks!
Sara
Gotta be a better way...Help
×