Question about Xact Communication XTR1 SIRIUS Radio Receiver

Open Question

Xact xtr1 Can't get channels. Radio making frequency noise.

Posted by Anonymous on

Ad

3 Related Answers

Anonymous

  • 1 Answer

SOURCE: Problem with Xact Communication XTR1 SIRIUS Radio Receiver

Turns out the radio isn't broken after all. In my research on your site I ran across a user who said he/she just plugged their radio in, turned it on and waited. I tried that and after a couple of minutes of a Sirius logo screen, then a blank screen followed by a high pitched beep the radio started playing again. I then remembered that one of the last things I input with the remote before the radio stopped working properly was mistakenly selecting an unwanted prompt on the AutoShutDown menu. When the radio finally came back on I selected Factory Default to reset all functions and now it operates properly. Thanks for the help.

Posted on Mar 28, 2009

Ad

Stevo_1

  • 4 Answers

SOURCE: trying to connect Sirius Xact Radio

Got to here for direct DL: http://www.xacttechnology.com/getdoc.php?id=37 -or- Here and click on the Documents: XTR1 Manual link: http://www.xacttechnology.com/Sirius-Satellite-Radios-7/XTR1-Sirius-Satellite-Plug-and-Play-Receiver-12.html

Posted on Aug 27, 2009

Ad

kenneth njonjo

  • 1575 Answers

SOURCE: xact xtr1 turns on then off

Hi try replacing the phones battery and see what happens.

Thanks!

Posted on Jan 05, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden bearcat scanner wont scan


Make sure the volume is up a little and then make sure the squelch is set so you do not hear any static (white noise). Also make sure the lock button is not on. Depending on the model, make sure the channels are not locked out in the menu. Make sure there are frequencies programmed in the channels. If these suggestions don't work, tell us more about the scanner like model number, how many channels, crystal or programmable, etc.

Jan 10, 2018 | Uniden Radio Communications

1 Answer

Cobra frs 104


look in the battery compartment for a series of tiny switches under the batteries.. these switches must be identical for each radio..it puts them on the same frequency..then select channels with no interference..retry radios..

Jan 26, 2014 | Cobra FRS 250 (14 Channels) 2-Way Radio

1 Answer

How do I program a uniden BC 145xl base scanner


  • Press the power button to turn the scanner on.
  • Press "MAN" (for manual)
  • Now pick a channel where you want to store a frequency at and enter it on the keypad.
  • Now press the "MAN" button again to go to that channel.
  • Now enter the frequency you want into that channel and don't forget to include the decimal point.
  • Now press the "E" button (for enter) and you have programmed one frequency.
  • Repeat these steps until your scanner is programmed.
  • Now you can press the up and down arrow buttons to scroll manually through the channels or just press "scan" to scan through them.
  • Make sure to keep your squelch just above the noise so you pick up stations well.

  • Hope this helps.

Nov 24, 2011 | Uniden Radio Communications

1 Answer

How do i put my new cls1110 on prog 1 frequency 4


The CLS1110 is a one channel radio. However the one channel can be changed to another frequency and/or PL code. With the radio turned OFF, hold in the PTT and the MON, while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock it in.

Best regards.

Nov 16, 2010 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

My galaxy dx 88 hl makes a laoud noise when you key up and the frequency counter it's off. Channel 19 is on channel 18.


my galaxy 88 cb makes a popping noise through the speaker when I key up how do I solve this problem?

Jul 15, 2010 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

Is it possible to create a channel on a two way radio?


You have posted under the CLS1110 heading. If this is the radio you have here are the programming instructions: With the radio turned OFF, hold in the PTT and the MON, while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming2.gif mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock it in.

The CLS1110 has 56 built-in frequencies to choose from. You cannot program in a "custom" frequency. Only choose from the list.

Sep 28, 2009 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

Lost manual and cannot program scanner bc145xl


Hi,
Try these instructions from Wiki.answers

Turn on unit.
Press MANUAL button.
Press MANUAL button again to select the channel you want to program. Note the channel in the display. If there is a hyphenated symbol in the upper left corner the channel has been locked out. Press the LOCKOUT button once to remove the symbol or press the LOCKOUT button to lock a channel out. To find out if there is a frequency programed into that channel, press the PREVIEW button. Each digit of the frequency that is stored in memory will be displayed in the LED display. To program a new frequency into that channel, simply press the digits of the frequency you want, including the decimal point. Press the "E" keypad key to enter it into memory. If you get a "E" displayed in the LED display, the frequency was entered wrong, is not a valid frequency or is out of range for the scanner. Last but least, the scanner is not working properly. If the channel is active, (communications going over it) set SQUELCH to higher number, until you hear the communications or just noise. To set the SQUELCH, select a channel that has only noise and turn it down to the point the noise disappears. You make have to readjust it to your liking. Once you have the channels programed you can select the SCAN button to listen to all the channels or select the MANUAL button to listen to just one channel. If there are channels that you don't want to hear during the scan mode, go to MANUAL and select the channel you don't want to hear and press LOCKOUT button. Then press SCAN again it will only scan channels you want to hear.

Hope this helps.

Sep 07, 2009 | Radio Communications

1 Answer

I am trying to change the channel on my radio, how do I do that?


The CLS1110 is a one channel radio. However the one channel can be changed to another frequency and/or PL code. With the radio turned OFF, hold in the PTT and the MON, while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock it in.

Jul 08, 2009 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

My cls 1110 walkie is stuck on channel 1, how can i change it?


The CLS1110 is a one channel radio. However the one channel can be changed to another frequency and/or PL code. With the radio turned OFF, hold in the PTT and the MON, while turning the radio on. Continue to hold the PTT and MON until the radio stops making noise. You are then in programming mode and can use the menu button to walk through the stages of programming. Use the PTT to change the settings, and the MENU to lock it in.

Jun 09, 2009 | Motorola CLS 1110 (1 Channel) 2-Way Radio

1 Answer

Motorola T5500 Scanning problem


Most likely it is stopping at a channel which has RF (radio frequency) activity. The activity doesn't have to be another radio with someone talking. It could simply be something transmitting on the same MHz. The only way to know for sure is to try the radios in a different location (as in moving away from the problem). If you want to avoid this "noise" you can turn on your interference eliminator, and it should block out anyone transmitting on the frequency (unless they set their interference eliminator to the same code as yours.)

If the noise continues when you try the radios in a different location (more than 5-10 miles away), then you will have to investigate a problem with the radios themselves.

Nov 09, 2008 | Radio Communications

Not finding what you are looking for?
Xact Communication XTR1 SIRIUS Radio Receiver Logo

Related Topics:

54 views

Ask a Question

Usually answered in minutes!

Top Xact Communication Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Cindy Wells

Level 3 Expert

6259 Answers

Brad Brown

Level 3 Expert

18666 Answers

Are you a Xact Communication Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...