Question about Sony FD Trinitron WEGA KV-32FS100 32" TV
Television just went black power button is flashing green then red contiuously
If you have the original remote for this TV on the pip menu (left side slider on remote all the way up) there is a pip off button. If you unplug the unit long enough it should go back to normal. If you go into demo mode and then exit mode you will again be out of the pip. With out the original remote you cannot easily turn pip off.
Posted on Dec 28, 2007
Here is a few basic starts. Ask if you need more after these.
1) Does it look the same on DVD or VCR when playing one of these sources? If not then you have a bad connection problem with your TV. I need more information if this is the case.
2) Do you have a cable box or converter box? How is it hooked up? Component Cables?
3) Have you done a factory reset on your TV? Unplug it for a min of 30min (all power sources)
Posted on Feb 23, 2009
have over 10 years experience in electronic tech
I know this isn't what you want to hear, but the problem you've described can't be fixed with troubleshooting. Your TV will have to be repaired. There is a part that has developed a defect and needs to be replaced. If you're still in warranty, the TV will be repaired at no charge to you. The warranty would likely be at least one year from the date of purchase from the manufacturer. If you purchased an extended service plan they will repair the TV at no charge as well.
If the TV is no longer in warranty, it will likely cost a minimum of $150 parts and labor. This is assuming that you only need one circuit board or small part. If the problem is more than one of the circuit boards, the price of repair could go much higher.
I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.
Please let me know if I can be of further assistance.
Posted on Jul 11, 2009
WARNING- VOLTAGES STORED INSIDE YOUR TV CAN KILL YOU EVEN AFTER ITS BEEN UNPLUGGED FOR DAYS..your problem is in the zero cross detect circuit . youu should take it to a repair facility. -Or replace diode D647 . Or on remote in this order press "display -5- vol down - pwr ." and then you could watch it right now ..kinda
Posted on Oct 01, 2009
Testimonial: "Thanks for the amazingly quick response. This is very helpful information."
Tips for a great answer:
Apr 19, 2013 | Hitachi 43FDX20B 43" Rear Projection...
Jan 10, 2013 | Televison & Video
Dec 31, 2010 | Panasonic PT-50LC14 50" Rear Projection...
Oct 31, 2009 | Panasonic TH37PX60 37 in. Plasma...
Aug 15, 2009 | Televison & Video
May 19, 2009 | Syntax Olevia 50" Rear Projection...
Jun 20, 2008 | Televison & Video
197 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: