Broken outer cover on Jabra Bluetooth headset with ear hook.

I would charge it using anohter charger, or through the USB into the computer if available. If it still holds a charge for so little time then call jabra for a warranty replacement,

Rylan

get it here

http://www.eglobalwireless.com/p-3525-replacement-ear-hook-for-jabra-bt125-bt3010-bt8010-headset.aspx

if there is any problem in the headset operation, they will replace it. and if not, they are not responsible. sorry to say they are not going to replace., any way try once, it might work like say you are not able to use it properly and you have some problem with it.

http://www.msgdigital.com/productdetail.asp?productid=46551

just twist that hook.u will be able to place that in the ears
thanks..

It's kinda cheesy, but a piece of #10 wire fits perfectly into the hole. That's what I'm using now. Neither the original is very comfortable, but they work.

Same thing happened to me. For about $5, I went to Home Depot and bought 24 gauge wire (about 5") and a pack of black heat-shrink plastic sleaves (1/8th inch or 3/16) from the electrical department. The 24g wire fits perfectly through the rubber slot after you pull out the broken ear hook. Use a pair of pliars to bend the wire to shape your ear (use the broken jabra ear hook as a template). Once you have the right shape and have filed down the sharp edges, slip the heat-shrink plastic sleave over the wire, making sure you leave the end piece that goes into the slot of the headset as bare metal. Use a hair-drier on high-heat to shrink the black plastic. Mine has worked perfectly for over a year and actualy fits better than the original.

ok, thanks.
Found the problem. As always "Read the instructions first!"
Bye

How do I have to set up my Jabra head set?

Call the Jabra Support hot line they will send you replacement earhooks free

Takes less then 5 mins to get them sent