Question about LG KU990 Viewty

2 Answers

Samsung SPH-i700 PAD Phone, Stuck dialog box

THe dialog box that states the phone is off "do you want to turn it on?" is stuck on the screen and won't go away when pressing either the Yes or No.  All functions apprear to be normal but the dialog box is blocking my screen.  I have tried a soft reset but without success.

Posted by Intrude on

  • 1 more comment 
  • Anonymous Dec 30, 2007

    i dont know how to start

  • KaseyD Jan 16, 2008

    phone says power off on and I can't get it to work

    even when it says would you like to trun phone on and you press yes it does nothing

  • Anonymous Mar 28, 2008

    THe dialog box that states the phone is off "do you want to turn it on?" is stuck on the screen and won't go away when pressing either the Yes or No. All functions apprear to be normal but the dialog box is blocking my screen. I have tried a soft reset but without success

×

Ad

2 Answers

Anonymous

I kept trying to reset by pushing the stylus into the reset hole and finally was able to make the dialog box disappear. I would recommend backing up data before trying this though. Even though the dialog box went away, I still believe there is some sort of software glitch causing this and would not be surprised to see it happen again. Back up!, Back up!, Back up!

Posted on Dec 31, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My phone has the phone off on the screen and i cant use my cell phone

Posted on Dec 30, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to master reset LG Optimus Fuel LGL34C


reboot the phone. Once you see the LG screen during boot start tapping ONLY THE VOLUME UP BUTTON repeatedly until the phone reboots. This should get you into the recovery. From there you should be able to click the factory reset button.

Sep 28, 2014 | Cell Phones

1 Answer

How to reset tv lamp on mitsubishi wd-65831


RESET LAMP TIMER
    • 1 Turn on the television after replacing your television's projection lamp with a new unit. If a dialog box displays on the screen asking you to reset the lamp timer, use your remote control's "Arrow" buttons, highlight "Yes" and press "Enter." If the dialog box does not appear on your screen after turning your television on, proceed to the next steps.
    • 2 Turn on the television, then press the "Menu" button on your control. Navigate to the "Setup" menu, press "Enter" and choose "Low Powericon1.png" from the menu options displayed on the screen. Press the "Exit" button on your remote control and turn off the television.
    • 3 Repeat the first step to reset your television's lamp timer. If your television screen is unable to produce a picture after replacing the projection lamp, press the "<", ">" and "Power" buttons on your remote control at the same timeicon1.png to reset the lamp timer.

Read more: http://www.ehow.com/how_7358147_reset-lamp-timer-mitsubishi-65731.html#ixzz33n0pJu2S

Jun 05, 2014 | Panasonic Televison & Video

1 Answer

Dell Pc won't boot gets black screen with floating dialog box


Floating dialog box is the monitor's self test. Your monitor tests good. Your computer is the problem.

Mar 04, 2013 | Dell Dimension 3100 PC Desktop

1 Answer

Stucked dfu mode iphone 3g


Open redsnow, click extras, and select Custom iPSW. A dialog window should pop up, go to where you have the ORIGINAL iPhone 3G 4.2.1 iPSW and select it. Press ok and It should then create a NO_BB iPSW in the same location as where the original iPSW is. Second step is to enter PWNed DFU mode. Open redsnow again, click extras and select PWNed DFU mode. Follow the onscreen instructions and you should be in PWNed DFU mode. Open iTunes and a message should show stating that your device is in recovery mode. Great now press ok, hold Shift and click Restore. A dialog box should show, go towhere the NO_BB iPSW is. Click it and press ok. Your device should now be restoring. Afterwards your device should turn on.

Feb 26, 2013 | Apple iPhone 3G

1 Answer

Have a vertical green line on my sharp led aquos, it is only 4 months old. how do i get rid of the line


I'm assuming you have a high definition cable box connected to this television with an hdmi cable a motorola perhaps. If that is correct then with you motorola cable box power turned off press the menu button on it. Yes I just stated that you turn off your motorola cable box and then press the menu button on it. A hidden menu will pop up on your television screen. Yes the television should be turned on but the motorola box should be turned off when you press the menu button. I am sorry for reiterating that so many times but there have been numerous persons that have been more concerned about why this works in this way than just getting it to solve their problem. So you navigate down to the color space setting. You will be able to navigate left or right to choose a different setting under color space. You will see maybe RGB of YCbCr 4:4:4. Choose the one that your cable box is NOT set to currently and the green line should go away.

Sep 20, 2011 | Sharp AQUOS LC-52D82U 52" HDTV LED TV

1 Answer

My pound sign comes up as # and my @ as "


Windows 7 or Windows Vista
  1. Click Start Collapse this imageExpand this imagevistastartbutton.jpg, type intl.cpl in the Start Search box, and then press ENTER.
  2. On the Keyboards and Language tab, click Change keyboards.
  3. Click Add.
  4. Expand the language that you want. For example, expand French (Canada).
  5. Expand Keyboard list, click to select the English(United States) check box, and then click OK.
  6. In the options, click View Layout to compare the layout with the actual keyboard.
  7. In the Default input language list, click English(United States) - English(United States), and then click OK two times.
  8. In the Regional and Language Options dialog box, click OK. Note The Language bar appears on the taskbar. When you rest the mouse pointer over this bar, a tooltip appears that describes the active keyboard layout.
  9. Click the Language bar, and then click English(United States).

Windows XP
  1. Click Start , type intl.cpl in the Run box, and then press ENTER.
  2. On the Languages tab, click Details.
  3. Under Installed services, click Add.
  4. In the Input language list, select the language that you want. For example, select French (Canada) .
  5. In the Keyboard layout/IME list, click English(United States), and then click OK .
  6. In the Select one of the installed input languages to use when you start your computer list, click English(United States) - English(United States), and then click OK.
  7. In the Regional and Language Options dialog box, click OK. Note The Language bar appears on the taskbar. When you rest the mouse pointer over this bar, a tooltip appears that describes the active keyboard layout.
  8. Click the Language bar, and then click English(United States).

How to make sure that the selected layout matches the keyboard Windows 7 or Windows Vista
  1. Click Start, type osk in the Start Search box, and then press ENTER.
  2. Match the keyboard on the screen with the physical keyboard to make sure that the layout matches.
  3. To check the uppercase characters, click the shift key on the keyboard or on the screen, and match the characters printed on the keyboard.
Windows XP
  1. Click Start, type osk in the Run box, and then press ENTER.
  2. Match the keyboard on the screen with the physical keyboard to make sure that the layout matches.
  3. To check the uppercase characters, click the shift key on the keyboard or on the screen, and match the characters printed on the keyboard.

Jan 07, 2011 | Dell Computers & Internet

1 Answer

Before Windows can boot-up the screen turns solid blue & a Dialog Box state "Entering Power Saving Mode". The screen then appears that the sleeping mode has occurred.


just switch off and switch on the monitor or press any button on keyboard to bring monitor from power saving mode thats all

Sep 23, 2010 | Dell E207WFP LCD Monitor

1 Answer

The Update Assistant keeps opening a dialog box stating that it has no access to the router. But whenever I try to do anything in the dialog box--click a button or close the dialog--an Internet Explorer...


1.Press Windows logo key + R, type winver and hit Enter key.( Check the version details of Windows 10 installed on your computer).
2.Shutdown your device ,restart it back and then initiate the upgrade to see if goes correctly this time.
If any third party Antivirus or Online security software is installed, then try to disable it for a moment then try to initiate the upgrade to see if it goes correctly.
In case problem still persist, then try to upgrade it in Clean Boot state.
1. Press Windows Key, type msconfig in the search box, and hit Enter.
2. On the Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all.
3. On the Startup tab of the System Configuration dialog box, tap or click Open Task Manager.
4. On the Startup tab in Task Manager, for each startup item, select the item and then click Disable.
5. Close Task Manager.
6. On the Startup tab of the System Configuration dialog box, tap or click OK, and then restart the computer.

Apr 08, 2017 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Malfunctioning keyboard


Must be the CTRL key that is stuck...

May 15, 2008 | Dell Inspiron 3500 Notebook

Not finding what you are looking for?
LG KU990 Viewty Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6082 Answers

Troy Staley
Troy Staley

Level 2 Expert

38 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...