Question about Bunn CWTF 15-APS Coffee Maker

Open Question

Bunn model CWTF15 WILL NOT FILL POT - Bunn CWTF 15-APS Coffee Maker

Posted by Anonymous on

Ad

4 Related Answers

woobie dog

woobie dog

  • 1273 Answers

SOURCE: BT-10-B Bunn Thermofresh that will not heat or fill pot

Lots of times minerals clooect on the heating element and inside the heating chamber. The easiest thing to try is to put white vinegar into the filler, displacing some of the water into the pot. Leave this to soak for about an hour, then flush with several pots of water until the vinegar smell cannot be detected in the water. Make sure that the switch on the side is "ON". You may have an indicator light. The switch on the upper front is for the warmer. The reason you only got a partial pot of water is that the reservoir wasn't completely full. Once you have filled it completely, you should fet a full pot out for every full pot in. If all of the above gives you no relief, you may need to test the heating element for voltage and continuity. If it tests 'open', you will need to replace it.
Good luck, --W/D--

Posted on Jul 17, 2009

Ad
EsWorld

Ernest R

  • 1618 Answers

SOURCE: Bunn model CWTF15 brews coffee but coffee not hot

Check the setting on the thermostat behind the front panel, it might not be set correctly, turn it all the way high the back 1/4 turn.

Posted on Nov 06, 2009

Ad

Anonymous

  • 3 Answers

SOURCE: When I pour water into (empty) pot to fill. Bunn coffee maker

If you pour water into the machine, and water comes out, then the reservoir is full of water. There is no way the water can bypass the reservoir and go directly into the pot.

Posted on Apr 28, 2010

Anonymous

  • 12 Answers

SOURCE: I have a Bunn CWTF15. Water does not fill the

If u haven't cleaned it out using 3/4 vinegar to 1/4 water, some times this will happen. after running this thru ur coffee maker, (u won't believe the junk that comes out), then run full pots of water to rinse out (2x's). This should help it perform better.

Posted on Sep 12, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

CWTF15 WILL NOT STOP WATER FLOW WHEN POT IS MADE.


The coffee dispensing valve is stuck open. It may be due to Calcium deposits.
Descale the machine or manually clean the dispensing valve and the diffuser disc that unscrews to be removed. This diffuser is visible just above the coffee pot.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Oct 16, 2014 | Bunn CWTF15

1 Answer

I have cwtf15-aps older model. Device is wired and plummbed in. lights are working but i get no hot water. Has not been used for about 3 years.


thermal fuse is blown. it is located in the top, right rear of the machine in what is now browned tubing. you can either bypass the fuse with a jumper, or get a new part through bunn (800) 352-BUNN (2866)

Dec 12, 2010 | Bunn CWTF15-TC

1 Answer

Pot only filling half way


If pot used to fill all the way then check the filter if one is installed and the restrictor on the back of the tank, you can also run the deliming spring through the brew tube.
If the pot never filled all the way then remove the front panel and use the instructions to reprogram the brewer.

Sep 24, 2010 | Bunn CWTF15-TC

2 Answers

I have a Bunn CWTF15. Water does not fill the coffee pot full anymore. Is there a float that needs to be adjusted? Would descaling help this problem? Thank you.


If u haven't cleaned it out using 3/4 vinegar to 1/4 water, some times this will happen. after running this thru ur coffee maker, (u won't believe the junk that comes out), then run full pots of water to rinse out (2x's). This should help it perform better.

Sep 12, 2010 | Bunn Automatic Coffee Brewer CWTF15 1

1 Answer

How do i clean my bunn air pot coffee brewer?


Run a pot of half water and half vinegar through the coffee pot and you may need to repeat this process a couple times to get all the calcium buildup cleaned out of the pot. Hope this helps.

Jun 21, 2010 | Bunn Automatic Coffee Brewer CWTF15 1

1 Answer

The coffee is not coming out hot into the pot.


Check the hi-limit switch on the tank and the inline fuse from the element to the ready light.

Jan 22, 2010 | Bunn Automatic Coffee Brewer CWTF15 1

1 Answer

Our Bunn CWTF15 three burner is over filling. What can we do to correct this problem?


There is a timer inside the front panel re-just the timer with an empty coffee pot right up to the top edge with water only.
if not successful let me know and I'll go further with your problem.my email address [email protected]
God Bless have a nice day.
Dickson

Jul 02, 2009 | Bunn CWTF 15-3 Coffee Maker

1 Answer

Not enough water to fill canister


You might have to descale the boiler on your bunn coffee brewer, If you have the patience I can walk you through it.

Mar 22, 2009 | Bunn CWTF15-TC

1 Answer

Water over filling pot


The procedure for setup of this coffee maker can be found here -

http://www.bunn.com/pdfs/commercial/manuals/10613.0000.pdf

Please email if you have additional questions.

Feb 02, 2009 | Bunn Automatic Coffee Brewer CWTF15 1

Not finding what you are looking for?
Bunn CWTF 15-APS Coffee Maker Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

Kelley Hopper

Level 2 Expert

67 Answers

gbob59

Level 3 Expert

3063 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...