WIth out knowing which Zoom remote you have I have condensed the instructions. You should be able to program your remote in one of two ways.
First try entering the codes one at a time below. Those are the code numbers for LG television for Zoom remotes. Just follow the step by step instructions and one of those codes should work your tv. If by chance none of the codes work, I have also included instructions on how to do a code search to search for your televisions code..
At the bottom is the link to Zoom where I found this information.. Good luck!!!
ZOOM LG CODES 004 005 006 012 019 056 057 058 082 155 156 171 172
Instructions for programing remote by entering codes
1. Manually turn on the TV.
2. Press and Hold the CODE SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH Button.
3. Press and release the TV button.
(The INDICATOR LIGHT will
blink, then remain lit.)
4. Enter the code using the
Number Buttons. After your
code is entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at your TV and
press the OFF·ON button. Your
TV should turn off.
Note: If your TV does not
respond, try all the codes for
If your TV does not respond after you have
tried all the codes for your brand try
searching for your code by following the steps below.
Code Search Option for Programing your Remote
1. Turn on the device you wish
2. Press and hold CODE SEARCH
until the INDICATOR LIGHT
illuminates, then release CODE
3. Press and release the device
button for the device you are
programming (TV, VCR or
DBS·CABLE). The INDICATOR
LIGHT will blink once, then
4. Press and release OFF·ON until
your device turns off.
Important: You may have to press
OFF·ON up to 200 times.
5. When your device turns off,
press the ENTER button, and the
INDICATOR LIGHT will turn off.
link to website http://axistronix.com/suppor.html