Dont know how to put it together - Edu-Science (10166) Telescope

Here is the manual


https://www.searspartsdirect.com/manual/579714supp-003126/haier-hlp21n-top-load-washer

Reverse of removal!

http://rent.rugdoctor.com/support contact them,they dont make instruction manuals

special tool required

If you pulled it apart and put it back together but now it won't work properly, try checking your IDE cables to the hard drive/cd-rom, make sure they aren't connected backwards. Otherwise just carefully look over the entire board, be sure that the processor, heat sink and fan assembly are all intact and connected properly, do the same with the RAM, power connection, any expansion cards.

Here are some pictures that helped me reassemable my powershot 5700 back together.

vette007

ooof i know how to put i back together and can teach you but its a doozi over the net. hows your experiance with airsoft internals also wat type of gun is it (spring gas aeg etc shotgun assault rifle pistol etc. email me @ [email protected] i can help you further with that info

You can download your manual on Evenflo's website:  Product Support, Replacement Parts.

Id need to know what model you had to put it together...

If you do know the model number just go to this link http://www.childcraftindustries.com/childcraft/assistance/
and type the model number in under "crib assembly instructions"

If you dont know the model number you might want to just browse the products and select one that looks similar to what you have and download those instructions.

Hope this helps...

Try emailing the manufcaturer directly for parts at [email protected] or call
1-877-525-7070.

The manufacturer should be able to assist you with any questions you have or parts that you may need to set up this crib.

Good Luck! from Moms Just Know