Question about Homedics Shiatsu Massager

Have power and heat but roolers do not move - Homedics Shiatsu Massager

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

How do I install Casette Feed Roller Kit

It's wery simple actually.Just take out the paper cassetes,open the right door and you remove the roller with one move,just push the plastic pin and pull the rooler of the axe

Sep 26, 2014 | Canon 2 Ir3300 Ir3300i B/w Copier/ Network...

1 Answer

Rooler kit error

1 Turn the printer off.
2 While pressing [- Item] and [- Value] turn the printer on.
RESET MAINTENANCE COUNT appears, followed by INITIALIZING.
After a few seconds READY appears.Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For HP Support

Apr 01, 2014 | HP Color LaserJet CM6040f MFP Q3939A...

1 Answer

How to insert papers in canon printer model no iP1300

I think Your printer problem in printer paper feeder. To resque the problem jast follow these method:
Open printer paper feeder. then open scrue and put off paper feeder. cheeck the plastic rooler. If it move tidely , try to move easily.
I think you will be relive
Thank you

Jun 05, 2011 | Canon PIXMA iP1300 Printer

1 Answer

When I try to print, the printer sounds like it wants to print but the paper does not get fed into the machine it just makes a really weird sound.

hi.... First check the lifter *** lifting the tray, when the caridge block move towards the left it pushes the plastic lock of lifter assembly to lift the tray check them for working if it works then go to next step..
clean the feed roolers & replace the paper seprator of the printor satuated on the end of paper feed tray (brown colour).
Your problem will be resolved 100%.

Aug 31, 2010 | HP DeskJet 612c InkJet Printer

2 Answers

My hp 1320 printer has a jam in the back. I think it is in the bottom but I don't know how to get tray out.

Only a technician can help you with a jam on that model. It must be stripped to the frame.

Jul 02, 2010 | HP LaserJet 1320 Printer

2 Answers

Vcr/dvd player has started eating tapes. dirty heads? how do you fix it?

OK, lets get the terminology correct and resolve this. The most common cause of this symptom is a bad drive belt. These units are a bit tricky to get to without a soldering iron. The cables to the video heads and the audio head are soldered in. These must be removed to gain access to the belt. What is happening is that the pinch roller is pulling the tape across the heads correctly, but the belt for the takeup side is slipping and is not pulling the tape back into the cassette. This is a very common problem and is due to the heat inside drying out the belt. The repair cost for this will be about $5-$8 for the belt and the local labor charge.

If the unit has been a good performer for a while, the repair is worth it as the replacement belt should last at least as long as the original.

Hope this helps,
Dan

Jun 15, 2010 | Philips Magnavox MWR20V6 DVD Recorder/VCR

2 Answers