Question about Ace Hardware Flair II GT-504 (GT504)
SOURCE: Sending Inverted Image
cleaning the drum contacts will do no good when it pertains to SENT faxes. chances are, your CIS is either dirty or is bad. lift up your control panel and look closely. you will see a piece of glass under the panel, about 1.5" wide and runs left to right . clean the glass real good with windex or alcohol and rag. look above the glass and you will see a white bar/plate. clean that as well. if that doesn't do it, then most likely the CIS, which stands for contact image sensor, will need replaced.
Posted on Feb 18, 2009
Tips for a great answer:
Sep 20, 2007 | ACE DT-A1212 (DTA1212)
Nov 18, 2009 | ACECAD 3" x 2.25" Flair GT-302 Graphic...
May 05, 2009 | Acecad ACECAT Flair (PEN INPUT - CORDLESS)...
Jun 17, 2008 | ACECAD 5x3.75 Flair GT-504BU Graphic...
Mar 13, 2007 | Acecad ACECAT III Graphic Tablet
May 12, 2010 | Ace Hardware Flair II GT-504 (GT504)
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: