How to fix a delonghi des 16 PF error

what mode is it in when this happens...Are you using pump or are you discharging into the tank??

Probe fault? Temperature sensing probe may have loose connection or water in the tip.

The repair man you talked to is correct. There is not replaceable fuse in your Delonghi model dehumidifier.

Thanks for choosing FixYa.

Your model Delonghi Dehumidifier has been retired. Therefore, no online manual is available. However, if you contact Delonghi Customer Support (1-800-322-3848), they can furnish one and answer the question about the PF error code at the same time.

Thanks for choosing FixYa.

Hi,
Here is a tip that I wrote about that problem...

http://www.fixya.com/support/r4662409-dehumidifier_running_but_no_water_in

heatman101

hELLO,


Try to replace or clean the filter

i don't know if this will help i have a delonghi portable ac and the e3 means not enough voltage to run properly. but it was doing the same thing as yours. i plugged it in where i knew there was good enough voltage and it works fine now

This appliance has 3-ft drainage hose and a 16-ft pump hose. I searched for a store that carry these hose, unfortunately, none of them sell a part or accessory for the DE500P.

Kindly click this link and verify if they could sell a hose:

http://www.nextag.com/delonghi-de500p/compare-html

Good luck.

I Had an E error (not an E1 error) when I was fiddling with my humidity/temp sensor on the face of the radiator fins (behind air filter).  The sensor was WET.  I dabbed it dry, let it sit all day, and re-assembled.  It works fine now.