Display doesn't work - GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

What burning software/version are you using?

What is the model number of the unit?

Are you check fuses? and harnesses connections.

could be one of two feuses

Hi, try to download a manual from here:

http://www.biostar-usa.com/mbdownloads.asp?model=M7VIG 400

Its great for troubleshooting.

I was not aware you could turn off the display, maybe it is just a bad display and you need to replace the board??!!
Ive been repairing Microwaves for 37 years. i do not remember seeing one where you could just turn off the display.

Hi
check the fuse box for fused fuse and replace them with the corresponding fuses.
Regards.

If display is scrambled, reset timer: Push reset button while holding down enter button.
If display doesn't show, check AAA batteries.

If timer still doesn't work, then Contact Intermatic.
8000 series comes with 1 year limited warranty
https://parts.intermatic.com/
Intermatic does not show replacement memory board for ET8000 series

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

i don't know mate