Display is not working hot - Alesis MasterLink ML-9600

ENGINE HOT TURN A/C OFF
Cooling System Description and Operation

ENGINE COOLANT HOT
The instrument panel cluster (IPC) displays ENGINE COOLANT HOT message when the IPC receives a class 2 message from the powertrain control module (PCM) requesting illumination of this driver warning.
ENGINE OVERHEATED
The IPC displays ENGINE OVERHEATED message when the IPC receives a class 2 message from the PCM requesting illumination of this driver warning.

DTC P1258: Engine Coolant Over temperature - Protection Mode Active
Have it check

Can you give more information about the make and model of the camera which you are attempting to use in your hot tub, please?

It sounds to me like the circuit board is bad, contact the manufacturer.

Identifying the hot keys
A hot key is a combination of the fn key and either the esc key or one of the function keys.
To use a hot key:
Briefly press the fn key, and then briefly press the second key of the hot key combination.
Hot key combination Description
fn+esc Displays information about system hardware components and the system BIOS version number.
fn+f1 Initiates Sleep, which saves your information in system memory. The display and other system
components turn off and power is conserved.
To exit Sleep, briefly press the power button.
CAUTION: To reduce the risk of information loss, save your work before initiating Sleep.
fn+f2 Decreases the screen brightness level.
fn+f3 Increases the screen brightness level.
fn+f4 Switches the screen image among display devices connected to the system. For example, if a
monitor is connected to the computer, fn+f4 alternates the screen image from computer display to
monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. The fn+f4 hot key can also alternate images among other devices that are receiving video
information from the computer.
fn+f5 Initiates the QuickLock security feature. QuickLock protects your information by displaying the
operating system Log On window. While the Log On window is displayed, the computer cannot be
accessed until a Windows user password or a Windows administrator password is entered.
NOTE: Before you can use QuickLock, you must set a Windows user password or a Windows
administrator password. For instructions, see Help and Support. To access Help and support, from
the Start screen, type help, and then select Help and Support.
fn+f6 Displays charge information for all installed batteries. The display indicates which batteries are
charging and reports the amount of charge remaining in each battery.
fn+f7 Mutes or restores speaker sound.
fn+f8 Decreases speaker volume.
fn+f9 Increases speaker volume.
fn+f10 Plays the previous track of an audio CD or the previous section of a DVD or a BD.
32 Chapter 4 Pointing devices and keyboardHot key combination Description
fn+f11 Plays, pauses, or resumes an audio CD, a DVD, or a BD.
fn+f12 Plays the next track of an audio CD or the next section of a DVD or a BD.



http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03555111-1.pdf

Check if there both hot wires and the neutral are ok at the control board.
You should have 110-120v between each hot wire and neutral, and 220-240v between two hot wires. If power is ok, replace control board (the display unit is on the control board).
Part numbers:
White: 74009221
Black: 74009223
Bisque: 74009222
Repairclinic.com has pictures of the parts.

My 2003 chevy suburban just started blowing hot air...it was working find , then i stopped to eat lunch, when I came out it started blowing hot air

run de-scale solution thru machine and flush several times