Question about Xterra Fitness Xterra Treadmill

1 Answer

Xterra tr3.0 Error 5 displayed when key is installed.

Posted by Anonymous on

Ad

1 Answer

Paula

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

New xterra trendmill will not start says error 5 help

Posted on Dec 29, 2014

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 5 stuck key


Precor Error 05, Key Depressed at Power Up Probable Cause: 1. A key is permanently depressed on the display.
2. An interface chip (IC) has failed in the upper PCA's keypad.
3. Liquid (cleaning solution or sweat) may be on the surface of a touch sensitive display.
Corrective Action
  1. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 is eliminated, the keypad is the cause and should be replaced.
  2. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 still appears, the upper PCA* is the cause and should be replaced. *Upper PCA's most commonly do not come with software. Remove the software (chip) from the existing upper PCA prior to replacement and install into the new upper PCA.
  3. Wipe away all liquid from the touch sensitive display. Reset power to the unit. If the Error 05 is eliminated, the liquid was the cause.

Precor Error Code 05

Feb 17, 2014 | Precor EFX 556 Elliptical

1 Answer

How do I fix an E5 error on T9450 Vision Fitness Treadmill


follow this steps and fix it. God bless you
The power up test sequence has detected a key in the operated condition. The power up test
sequence is performed every time the unit is turned on (powered up). This test is performed
because a permanently stuck key will inhibit the correct operation of the unit.
Possible Causes
1. A key on the display housing is permanently stuck in the operated condition.
2. One of the upper PCA's keypad interface chips has failed.
3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.
Possible Remedies
1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of
the display housing. Replace the display housing to correct the problem.
2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct
this problem. Most upper PCA's are provided without software. Therefore, the software (chip)
must be removed from the upper PCA being replaced and re-installed on the replacement
upper PCA.
3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up
sequence, if the ERROR 5 is no longer present, the liquid was the cause.

Nov 26, 2013 | Exercise & Fitness

1 Answer

H 05 error


follow this steps and fix it. God bless you

Error 5
Description
The power up test sequence has detected a key in the operated condition. The power up test
sequence is performed every time the unit is turned on (powered up). This test is performed
because a permanently stuck key will inhibit the correct operation of the unit.
Possible Causes
1. A key on the display housing is permanently stuck in the operated condition.
2. One of the upper PCA's keypad interface chips has failed.
3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.
Possible Remedies
1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of
the display housing. Replace the display housing to correct the problem.
2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct
this problem. Most upper PCA's are provided without software. Therefore, the software (chip)
must be removed from the upper PCA being replaced and re-installed on the replacement
upper PCA.
3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up
sequence, if the

Oct 13, 2013 | Bowflex Treadclimber

2 Answers

E5 code error


follow this steps and fix it. God bless you

The power up test sequence has detected a key in the operated condition. The power up test
sequence is performed every time the unit is turned on (powered up). This test is performed
because a permanently stuck key will inhibit the correct operation of the unit.
Possible Causes
1. A key on the display housing is permanently stuck in the operated condition.
2. One of the upper PCA's keypad interface chips has failed.
3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.
Possible Remedies
1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of
the display housing. Replace the display housing to correct the problem.
2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct
this problem. Most upper PCA's are provided without software. Therefore, the software (chip)
must be removed from the upper PCA being replaced and re-installed on the replacement
upper PCA.
3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up
sequence, if the ERROR 5 is no longer present, the liquid was the cause.

Aug 08, 2013 | Dmm Vision Fitness T9500 Treadmill

1 Answer

V-Fit P4-CX9 error 5 will not run? anyone?


follow the steps and fix it. God bless you

The power up test sequence has detected a key in the operated condition. The power up test

sequence is performed every time the unit is turned on (powered up). This test is performed

because a permanently stuck key will inhibit the correct operation of the unit.

Possible Causes

1. A key on the display housing is permanently stuck in the operated condition.

2. One of the upper PCA's keypad interface chips has failed.

3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.

Possible Remedies

1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of

the display housing. Replace the display housing to correct the problem.

2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct

this problem. Most upper PCA's are provided without software. Therefore, the software (chip)

must be removed from the upper PCA being replaced and re-installed on the replacement

upper PCA.

3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up

sequence, if the ERROR 5 is no longer present, the liquid was the cause.


Jan 08, 2013 | Exercise & Fitness

1 Answer

My precor ex 5.24 is showing an error 05 on the screen. What does that mean and how to solve it?


please proceed according and fix it. God bless you
Description
The power up test sequence has detected a key in the operated condition. The power up test
sequence is performed every time the unit is turned on (powered up). This test is performed
because a permanently stuck key will inhibit the correct operation of the unit.
Possible Causes
1. A key on the display housing is permanently stuck in the operated condition.
2. One of the upper PCA's keypad interface chips has failed.
3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.
Possible Remedies
1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of
the display housing. Replace the display housing to correct the problem.
2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct
this problem. Most upper PCA's are provided without software. Therefore, the software (chip)
must be removed from the upper PCA being replaced and re-installed on the replacement
upper PCA.
3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up
sequence, if the ERROR 5 is no longer present, the liquid was the cause.

Jan 08, 2013 | Exercise & Fitness

1 Answer

Treadmill not working at all


follow the steps and fix it. God bless you

The power up test sequence has detected a key in the operated condition. The power up test

sequence is performed every time the unit is turned on (powered up). This test is performed

because a permanently stuck key will inhibit the correct operation of the unit.

Possible Causes

1. A key on the display housing is permanently stuck in the operated condition.

2. One of the upper PCA's keypad interface chips has failed.

3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.

Possible Remedies

1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of

the display housing. Replace the display housing to correct the problem.

2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct

this problem. Most upper PCA's are provided without software. Therefore, the software (chip)

must be removed from the upper PCA being replaced and re-installed on the replacement

upper PCA.

3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up

sequence, if the ERROR 5 is no longer present, the liquid was the cause.

11_15_2012_7_01_45_pm.gif

Nov 15, 2012 | Exercise & Fitness

1 Answer

F 5 shows in display no controls will work


follow this steps. God bless you

The power up test sequence has detected a key in the operated condition. The power up test

sequence is performed every time the unit is turned on (powered up). This test is performed

because a permanently stuck key will inhibit the correct operation of the unit.

Possible Causes

1. A key on the display housing is permanently stuck in the operated condition.

2. One of the upper PCA's keypad interface chips has failed.

3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.

Possible Remedies

1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of

the display housing. Replace the display housing to correct the problem.

2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if

the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct

this problem. Most upper PCA's are provided without software. Therefore, the software (chip)

must be removed from the upper PCA being replaced and re-installed on the replacement

upper PCA.

3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up

sequence, if the ERROR 5 is no longer present, the liquid was the cause.

11_15_2012_7_02_43_pm.gif

Nov 15, 2012 | Star Trac 3900 Treadmill

1 Answer

Installed new cartridge and comming up machine won't regognise it saying tonner life end install new cartridge


To reset the sensor after installing a new toner cartridge follow these steps. 1. With unit powered On, open the front cover. 2. Press the “Options” key. Display will show “Replace Drum?” 3. Press “Start” key. 4. Press 1,0 . 5. Display will show “Accepted” for approximately 2 seconds. Then display will change to “Cover Open”. 6. Close cover and see if Toner Life End error message has gone.
Try this. We are Brother authorized.

Apr 15, 2010 | Brother MFC-7420 Laser Printer

1 Answer

Toner life end warning light. replaced with new toner/drum still error


To reset the sensor after installing a new toner cartridge follow these steps.
1. With unit powered on open the front cover.
2. Press the "Options" key. Display will show "Replace Drum?"
3. Press "Start" key.
4. Press "+" key 10 times until the display reads 10.
5. Press "SET" key.
6. Display will show "Accepted" for approximately 2 seconds. Then display will change to "Cover Open".
7. Close cover and see if Toner Life End error message has gone.

Jul 28, 2009 | Brother DCP-7020 Black and White Copier

Not finding what you are looking for?
Xterra Fitness Xterra Treadmill Logo

Related Topics:

2,468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xterra Fitness Exercise & Fitness Experts

Tom Chichester

Level 3 Expert

55379 Answers

ray gallant

Level 3 Expert

67977 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Xterra Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...