- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
fuser temp too high to reset turn off machine then turn on while holding down the utility/counter button when the trouble reset button comes up on the touch screen touch it and make sure it says ok then turn the machine off wait 10 seconds and turn back on if error code comes back fuser unit will have to be replaced
The EIO accessory in slot 2 has encountered a critical error as specified. On the back of the machine you have a additional card installed (Network Card, Hard drive, USB, etc.. ).
Steps to resolve: Turn machine off and unplug power cord. Re-seat the card in the EIO slot. Power machine back on, see if it works. If machine still displays the error - Install the card into the other EIO Slot,(Their is 2 slots on the back of the formatter) Power Machine back on to see if it works.
If Problems still persists: Remove the card from the machine, Turn machine back on and see if it comes up to a normal operation. If the machine is working correctly, it's most likely a Bad EIO Card.
If machine still doesn't operate as it should you will probably need a formatter.