Driver usb moviebox - Pinnacle Studio MovieBox USB Video Capture

Buy a pcmcia firewire card for your laptop, usb for movie capture is not good.

http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Family/Studio+MovieBox+Ultimate+Collection+version+14.htm
The above link, about halfway down page on right, shows downloads, upgrades, forums, etc. If you can't find what you need, maybe try the forum.

Yes!

Here is the link to the drivers:

http://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm

Best of luck to you!

http://www.latestdriversupdate.com/driver/45412.html

Have you installed the Moviebox Win 7 Drivers?

Yes. The driver is recognized by other brands.

This is the latest hardware device that can used for Studio 14.

Check the list.

USB based

• 710-USB
• 510-USB
• 700-USB
• 500-USB
• MovieBox Deluxe
• DVC-103
• DVC-107
• DVC-100
• DVC-90
• DVC-130 (There are no 64-bit drivers for this product.)
• DVC-170 (There are no 64-bit drivers for this product.)

PCI based

• 700-PCI (a.k.a. Pinnacle Studio Deluxe 2)
• 500-PCI (a.k.a. Pinnacle AV/DV)
• Any 1394 cards.

Are you using vista 32 or 64 bit system? If Vista 64 bit there is no driver for your device and the only available is 32 bit only. Aside from that you can check also the video cable you were trying to used. If firewire under import/capture tab of Studio 14 you need to select the name of your camcorder or dv camcorder. Check that out and try.

i want driver for pinnacle movie box deluxe usb on windows seven7 thanks

Turn off CPU, Unplug Power cable, And all usb devices, let it sit for about 20mins. Plug it all back in. Turn on the CPU!

You can use a universal one but it has to be 3.3 Volts at 3 AMPS and the tip of the plug must be positive. If you have a radio shack by you they should be able to get you the correct adaptor.

Thanks,
Mark