Grundig 70--741 security code

English only on Fixya please. We are a North American website, not Croatian. Use Google Translate.

https://translate.google.ca/?sl=auto&tl=en&text=Pozdrav%2C%20imam%20grundig%20tv.Ne%20mogu%20da%20otvorim%20aplikacije%20.Pise%20greska%206.%20Sta%20treba%20da%20uradim&op=translate

Hello, I have a grundig tv. I can't open the applications. It says error 6. What should I do.

Odgovor je ovdje

https://www.google.com/search?q=grundig+tv+error+code+6

..

I can't find the GF70 manual but hopefull below could provide some clue to your problem The original key # is 0000 http://www.grundig.co.uk/content/ug/GUVCD2800.pdf?language=en-GB This is new model of grundig and should be using the same method on the lock key. Refer page 22 of 42... Will dig out my old datasheet folder . this might take sometimes... Hope this helps...

Remote Control Codes For Grundig TVs

Grundig 3 Digit TV Remote Codes
113
110
128
Grundig 4 Digit TV Remote Codes
0195
0160
0161
0171
0310
0320
1144
1124
1131
Grundig multi-brand remote codes instructions for TV's.
1 - Turn on TV.
2 - Press and hold the TV key and enter the codes for your brand.
3 - If your TV turned off then you entered the right code and setup is complete. repeat with next code if needed.

Try 0345 563 582 515 098 584 219 104 233 223 065 471
Grundig
FT70-700 822DOOFA MW82- 500IRDT ST63725 ST63755 TF55-302 GT210S. MW822699 CVC2030ST ST70-875
563
Grundig
T70-1021, T70-1022
065
Grundig
MW82701 ST55/730 MW70/2700
582
Grundig
GT1401
515
Grundig
T55-1120 T55-1020 WF703020
471
Grundig
32WF100 W82-2030
584

5290 is the master password

reset code for grundig car200 casette radio

iv typed in the wrong code on my grundig tv vcr combie and now i cant watch tv because it wont let me by the paswod

Please i have this Grundig lcd tv,model number GU22DVD,how to enter service mode to change sound standard PAL I toPAL BG,help me.

The installer code is 3477, switch off the tv and unplug from the mains and leave for at least 30 minutes before trying this when you switch on your tv it will ask you for a pin code - use the installer code and it works just fine :)

Hi Kjunse,

The Television may be faulty, but without reading the manual I can't say for sure. If you want to risk spend some money to find out, here is a link to a website selling the remote control you require for the GF70-600 TV. I've not had any dealings with the company but you could always contact them to check your buying an original (OEM*) Grundig remote before you buy one.

*OEM means, Original Equipment Manufacturer.

Hope this is helpful.

Regards,

Spare head 2.