Question about Casio MS-80TE Calculator

Ad

Type in 45, then type X15%, then type + and that should give you your answer

Posted on Feb 01, 2008

Ad

Try inputing the _____ press %, then + key for ____ value ,now % for answer.

works on my MS-80TE

Steve

Posted on Jan 23, 2008

Ad

I've been searching for the solution to this problem, as well. Apperently, there's no user's manual for this calculator. I'm going to call Casio on Monday to see if they can send me some sort of instructions. (800)962-2746 or (609)395-0154

good luck!!

Posted on Nov 04, 2007

Memory keys normally work by adding and subtracting values to them. It looks like you have two memories available, memory I and memory II. (M- I M- II M+ I M+ II) You recall these values with the MR(C) keys to use them in other calculations. Finally, you can clear the memory using the MC keys. Sometimes there is not a MC key. In this case, the easiest way to clear the memory is to recall the memory, multiply it by -1, and add it to the memory. This should set it back to zero.

As an example, if we enter 5 M+ I, 10 M+ I, and then hit MR-I, we should get the answer of 15. If we then enter 13 M- I, and hit MR-I, we should now get an answer of 2. Now if we hit MC - I and then MR - I, we should get the answer of 0.

Let me know if you have any questions.

Good luck,

Paul

As an example, if we enter 5 M+ I, 10 M+ I, and then hit MR-I, we should get the answer of 15. If we then enter 13 M- I, and hit MR-I, we should now get an answer of 2. Now if we hit MC - I and then MR - I, we should get the answer of 0.

Let me know if you have any questions.

Good luck,

Paul

Mar 10, 2016 | Office Equipment & Supplies

In Run>Mat or in PRGM press the OPTN key. Pan to the next page by pressing F6>. the F5:ANGL

To enter a number in DMS use the F4: [deg '"]

Example :type in 15 deg 45 minutes 10 seconds

15 [F4] 45 [F4] 10[F4] then enter. The result is displayed in Decimal Degrees as 15.7277778

Press F5 [deg '"<==]

The number is converted to DMS.

See the screen capture.

To enter a number in DMS use the F4: [deg '"]

Example :type in 15 deg 45 minutes 10 seconds

15 [F4] 45 [F4] 10[F4] then enter. The result is displayed in Decimal Degrees as 15.7277778

Press F5 [deg '"<==]

The number is converted to DMS.

See the screen capture.

Dec 27, 2013 | Casio Algebra FX 2.0 Calculator

You can try pressing "alpha" or "2nd" and then pressing the key you saw the percent sign on.

here is a temporary solution in case that doesn't work:to enter a percentage up to write the digits before the tens and ones (if any, and if not, just type a zero), a point, and the last two digits.ex:

To write down the answer, take all the digits, take off the point, if the percentage is 99% or less, don't write the zero on the right of the period, and add a percent sign.

here is a temporary solution in case that doesn't work:to enter a percentage up to write the digits before the tens and ones (if any, and if not, just type a zero), a point, and the last two digits.ex:

- 56%=0.56
- 28%=0.28
- 132%=1.32
- 4243%=42.43

To write down the answer, take all the digits, take off the point, if the percentage is 99% or less, don't write the zero on the right of the period, and add a percent sign.

Oct 07, 2012 | HP 35s Scientific Calculator

Hi,

You can use either of this 2 equations.

ex: 75% off of 20

Equation 1: 20 minus (-) 75% = 5

Equation 2: (20*0.75) = 15 then press Ans key

20 - Ans = 5

Hope this helps.

You can use either of this 2 equations.

ex: 75% off of 20

Equation 1: 20 minus (-) 75% = 5

Equation 2: (20*0.75) = 15 then press Ans key

20 - Ans = 5

Hope this helps.

Jun 16, 2011 | Monroe Classic Calculator

You have a key, the label of which is the degree sign, the apostrophe
and the double quotation mark. It is located between the change sign
key (-) and the [HYP] key.

To enter an angle with degrees, minutes and seconds you use the key to separate between numbers

Ex: 18 deg 0' 45" you press 18 [Deg ' "] 0 [Deg ' "]45 [Deg ' "] [=] As you type the calculator displays 18 deg 0 deg 45 deg but the result will show correctly. You have to press the key after the seconds figure, otherwise you get a syntax error.

While the foregoing result is still in answer memory, if you press the [Deg ' "] key the result will be displayed in decimal degrees.

The key is used to enter the DMS values and also to toggle between DMS and D.D.

To enter an angle with degrees, minutes and seconds you use the key to separate between numbers

Ex: 18 deg 0' 45" you press 18 [Deg ' "] 0 [Deg ' "]45 [Deg ' "] [=] As you type the calculator displays 18 deg 0 deg 45 deg but the result will show correctly. You have to press the key after the seconds figure, otherwise you get a syntax error.

While the foregoing result is still in answer memory, if you press the [Deg ' "] key the result will be displayed in decimal degrees.

The key is used to enter the DMS values and also to toggle between DMS and D.D.

Jan 21, 2010 | Casio FX-115ES Scientific Calculator

Sorry, text was posted as clarification request. Here it is

You have a key, the label of which is the degree sign, the apostrophe and the double quotation mark. It is located between the change sign key (-) and the [HYP] key.

To enter an angle with degrees, minutes and seconds you use the key to separate between numbers

Ex: 18 deg 0' 45" you press 18 [Deg ' "] 0 [Deg ' "]45 [Deg ' "] [=] As you type the calculator displays 18 deg 0 deg 45 deg but the result will show correctly. You have to press the key after the seconds figure, otherwise you get a syntax error.

While the foregoing result is still in answer memory, if you press the [Deg ' "] key the result will be displayed in decimal degrees.

The key is used to enter the DMS values and also to toggle between DMS and D.D.

You have a key, the label of which is the degree sign, the apostrophe and the double quotation mark. It is located between the change sign key (-) and the [HYP] key.

To enter an angle with degrees, minutes and seconds you use the key to separate between numbers

Ex: 18 deg 0' 45" you press 18 [Deg ' "] 0 [Deg ' "]45 [Deg ' "] [=] As you type the calculator displays 18 deg 0 deg 45 deg but the result will show correctly. You have to press the key after the seconds figure, otherwise you get a syntax error.

While the foregoing result is still in answer memory, if you press the [Deg ' "] key the result will be displayed in decimal degrees.

The key is used to enter the DMS values and also to toggle between DMS and D.D.

Jan 19, 2010 | Casio FX-115ES Scientific Calculator

On this family of calculators, you do as follows

To convert this back to DMS, press [ANGLE][|=>DMS][ENTER] and the calculator displays the original value 15 deg 25' 32"

- Enter the first number (degrees), ex:15
- Press [2nd][APPS] (ANGLE) to access the Angle functions
- Select [1: degree symbol] [ENTER]
- Main screen shows 15 deg
- Enter the minutes, ex 25
- Press [2nd] [APPS](ANGLE) to access Angle functions
- Select [2:' apostrophe] [ENTER]
- Screen echoes 15 deg 25'
- Enter the seconds number, ex 32
- Press [ALPHA][+] (") to access the double quotation mark.
- Screen echoes 15 deg 25' 32"
- Press [ENTER]
- Calculator converts this in decimal degrees 15.42555556

To convert this back to DMS, press [ANGLE][|=>DMS][ENTER] and the calculator displays the original value 15 deg 25' 32"

Jan 11, 2010 | Texas Instruments TI-84 Plus Calculator

On this family of calculators, you do as follows

Enter the first number (degrees), ex:15

Press [2nd][APPS] (ANGLE) to access the Angle functions

Select [1: degree symbol] [ENTER]

Main screen shows 15 deg

Enter the minutes, ex 25

Press [2nd] [APPS](ANGLE) to access Angle functions

Select [2:' apostrophe] [ENTER]

Screen echoes 15 deg 25'

Enter the seconds number, ex 32

Press [2nd][+] (") to access the double quotation mark

Screen echoes 15 deg 25' 32"

Press [ENTER]

Calculator converts this in decimal degrees 15.42555556

To convert this back to DMS, press [ANGLE][|=>DMS][ENTER] and the calculator displays the original value 15 deg 25' 32"

Enter the first number (degrees), ex:15

Press [2nd][APPS] (ANGLE) to access the Angle functions

Select [1: degree symbol] [ENTER]

Main screen shows 15 deg

Enter the minutes, ex 25

Press [2nd] [APPS](ANGLE) to access Angle functions

Select [2:' apostrophe] [ENTER]

Screen echoes 15 deg 25'

Enter the seconds number, ex 32

Press [2nd][+] (") to access the double quotation mark

Screen echoes 15 deg 25' 32"

Press [ENTER]

Calculator converts this in decimal degrees 15.42555556

To convert this back to DMS, press [ANGLE][|=>DMS][ENTER] and the calculator displays the original value 15 deg 25' 32"

Jan 06, 2010 | Texas Instruments TI-85 Calculator

Hi,

**Logarithms in base 10 :Common logarithms**

**Logarithms in base e : Natural logarithms**

Don't forget to rate the solution and don't be stingy: 4 thumbs up won't leave you any the poorer.

- The calculator has a key labeled [LOG]. It allows you to calculate the common logarithms (logarithms in base 10).
- To calculate the common logarithm of a (positive) number you type in the number, press the [LOG] key .
- Ex: 15.32 [LOG][=] gives 1.1852558765

- The calculator has a key labeled [LN]. It allows you to calculate the natural logarithms of positive numbers.
- Ex: natural log of 15.32 is entered as
- 15.32 [LN] gives 2.729159164

Don't forget to rate the solution and don't be stingy: 4 thumbs up won't leave you any the poorer.

Nov 23, 2009 | Texas Instruments TI-36 X Solar Calculator

The formula is 200/700 equals the percentage;if you're in columns a, b, and c, the formula in c1 will look like:

=b1/a1.

Then you can format the cell to show the number (.2857) as a percentage (28.57%).

=b1/a1.

Then you can format the cell to show the number (.2857) as a percentage (28.57%).

Jan 03, 2009 | Microsoft Computers & Internet

Feb 06, 2014 | Casio MS-80TE Calculator

Nov 10, 2013 | Casio MS-80TE Calculator

527 people viewed this question

Usually answered in minutes!

I have the same problem with casio hs-85te :o(

R329.00 / 30%=

trouble with keys - non functional.

In a house that is 1478 square feet, what percentage is a 13.5 by 12.7 room?

×