Question about Packard Bell Easy One Silver 2101 Notebook

2 Answers

Packard Bell Easynote L4 Intermittent Power Problem

I have a laptop as above...intermittently it won't power up. When it does power up it works fine and normal and doesn't cut-out, however after powering down...sometimes (and it's getting more frequent) it won't power up at all....there's no sign of life at all i.e. if the power supply is plugged in, it doesn't indicate that it's charging and it won't power from the battery. When it does start it can work on the battery for a normal amount of time, suggesting that the battery is OK. Do you know if the input dc socket is prone to being a problem....could it be something more sinister???
Thanks in advance.
Dave

Posted by Dave088 on

  • 1 more comment 
  • Dave088 Oct 28, 2007

    Thanks Jack....but as I said above, even when the PC power supply is not plugged in and the battery is charged, it still doesn't switch on...no sign of life...it must be an internal thing.

  • Pureway Nov 23, 2007

    I have same problem; I was told that it could be internal small battery which powers CMOS!?
    If so where to find that battery in the laptop; I opened some gates at the back and saw no button type battery

  • Anonymous Jan 05, 2008

    Sounds similar but now my easynote won't power up at all. With the adapter plugged in or not. Tried it with battery out and plugged into the adapter....nothing. Adapter gets warm though, so its getting power.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The cmoss battery on the L4 is underneath the board you have to stripit down to get to it

Posted on Nov 25, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

When ever i have run into these symptoms you discribe the power supply is on it's way out.

Posted on Oct 25, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 TTR125L Starts and Idles fine, but cuts out when I accelerate.


CARB / FUEL LINES/FILTER /ADJUST IDLE/JET PISTON RINGS WORN TOO MUCH AIR ETC

Jun 14, 2013 | Motorcycles

1 Answer

My 1996 Olds LSS doesn't idle properly,idling surges sometimes,the temp. gauge doesn't work and sometimes the heater doesn't work.It may stall while driving.If I get in and the power seats...


Your first problem is to find out why the intermittent no-power problem. Honestly, that sounds like a loose conmnection somewhere. check all your grounds for clean and tight conditions Also, battery connections and alternator connections. Double check your power distribution center for any loose wires or poor connections. Once you solve that problem, then you can diagnose the other problems with poor idle and temp. gauge.

Oct 17, 2011 | 1996 Oldsmobile LSS

1 Answer

Toshiba Satellite C655-S5082. Won't power on. Worked fine last night. Today it won't turn on. Plug it it and no power light. With power cord plugged in when I push the power button the light for...


Hi.

Take out the AC power jack and then remove the laptop battery. Plug AC power back in and see if the laptop will turn on. If it turns on let it boot the operating system and then shut down as normal, remove the power cord and reinsert the battery and again see if it will switch on. If it does then there has been a glitch with the battery. If it doesn't then there is a problem with the battery.

If the laptop won't switch on either with or without the battery then there is a possibility that the motherboard has developed a problem.


Good luck.

Jul 16, 2011 | Toshiba Computers & Internet

1 Answer

Laptop locked mouse wont move


hi i would recommend the best is to take ur laptop to ur service provider since u haven't mentioned ur company name if ur laptop has a warranty then they will solve the problem for free n they won't charge u for that but if ur laptop doesn't has the warranty then they will charge u a minimum of 100-200 rupees and if its due to a software problem then try the best is system restore it restores ur system to an earlier time when ur windows worked fine but best is the above solution and thanks for posting ur problem if there are any further problem regarding the above topic then mention it in brief
with warm regards- bonefirediv

May 20, 2011 | Computers & Internet

1 Answer

Hi I am using my LG 42LH3000 LCD TV as a monitor for my Dell M65 Precision Laptop, which works fine but only as long as i have the lop top open, as soon as i close the lid of the lap top the TV goes blank....


Make sure you set the right action for the laptop closing. Right click on the battery or plug icon on far right of the windows bar the go to power option.

Then make sure that for any power mode the computer won't enter the sleep state when closing the lid.

If this doesn't work, you might have a dell specific software the takes care of the power setting and override the windows default one, try to find it and alter the settings as mentionned above.

good luck

May 07, 2011 | Dell Precision M65 Notebook

1 Answer

Hi, I really need some help. I want to know whats wrong before taking my hp pavllion dv600 to service centre. Problem is that the charger doesn?t charge the battery at all. Charger is fine with other...


If the power supply does not run the laptop without the battery, then the problem is the jack in the laptop, over time the plug breaks free of the motherboard causing intermittent operation or no power. If the power supply runs the laptop without the battery, it is the charging circuits on the motherboard that is the issue.

Jan 04, 2011 | Computers & Internet

1 Answer

Electrical system acting up at high RPM


halogen headlight taillight/brake light turn signals odo/speedo and horn. Here are the problems… Above about 6000 RPM the ignition will intermittently cut out. It doesn’t do it all the time. The higher the RPM the more it tends to cut out. Reducing RPM brings the lights back to bright. Above about 6000 RPM the lights start to dim intermittently. The higher the RPM the dimmer they get to where the lights almost go out. The engine runs fine if the RPM is reduced. The tachometer records some very high RPMS when the system starts to act up. Max RPM recorded is 19999 which is totally unreasonable. I am looking for some assistance in troubleshooting my electrical system and how to isolate the problem(s).,Start by disconnecting the cables from the generator coils and start up your engine. Problem still there? Do this to find out if your problems stems from the power side or the ignition side. If bike now runs fine, I'd look at the voltage regulator. Have you checked that all your connectors are ok? A grounding problem with a somewhat loose connector would be vibration sensitive, hence the problems at higher rpm. Is your stator plate securely fastened? Is your engine grounded to chassis? There might be a loose fastening in one of you engine mounts. Reply With Quote,,,

Nov 10, 2008 | 2000 Gas Gas EC 300

Not finding what you are looking for?
Packard Bell Easy One Silver 2101 Notebook Logo

Related Topics:

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Gustavo Ortiz
Gustavo Ortiz

Level 3 Expert

637 Answers

Are you a Packard Bell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...