Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Duet Washer Won't Start; Outlet Fine

Hi -- I have a Whirlpool Duet frontloading washer, model # GHW9150PW0. I got an f02 error, so looked up youtube and figured out how to remove the bottom panel and cleaned out the drain. I unplugged the machine before I did this. The washer was full when I opened the drain, lots of water came out. Anyway, there was lots of debris in the catch drain, which I removed. My problem now: when I plug the washer back in, the washer won't start. No lights come on. The outlet definitely works because it was working just before I unplugged the machine (it was mid-cycle) and when I plug in now, lights on the dryer, which has the same power source, come on. I would appreciate any help!!

Posted by Mike Larson on

Ad

1 Answer

travelbobgau

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

How old are they & where did you get them from?

Posted on Jan 30, 2014

Ad

3 Related Answers

Anonymous

  • 1 Answer

SOURCE: Duet washer door locked

Pull the front panel off, look for a plastic piece , it has a filter that you need to pull out. turn it to the left pull it out and clean it. This solved the problem for me. had the same issues.

Posted on Apr 18, 2008

Ad

Anonymous

  • 1122 Answers

SOURCE: whirlpool duet ht wouldn't start

remove the lower front panel,3 screws,side up and off,there is a tech sheet inside on the panel that should help you ,let me know what you find-mike

Posted on Oct 18, 2008

Anonymous

  • 121 Answers

SOURCE: No power to Whirlpool duet front loading washer

sorry no reset on that model but check the outlet

Posted on Nov 29, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is code message F02?


Repairing the F02 error code can usually be done without ordering parts. Tools needed to repair your whirlpool Duet F02 error code are towels and a quarter inch socket.
Tip the washer back at a 45 degree angle. On the bottom panel there are three or four screws, with the screws removed the panel will slide down and off. With the lower access panel now removed you will have access to the washers drain pump clean out.
With the water already bailed from the washer you can twist the filter head counter-clockwise to remove. Twisting the filter head counter-clockwise will loosen filter so it can be pulled out.
With the filter out clean and install it back into washer.
Run a quick cycle to ensure the washer is back up and running and the F02 error has disappeared. If the error comes back, it may require you to clean the drain pump filter again.
If you require a new drain pump motor, you can purchase the part from the link below.
- See more at: http://www.appliancerepairlesson.com/2011/03/12/how-to-fix-whirlpool-duet-error-code-f02-duet-sport-error-f02-fix/#sthash.PuGd0iuQ.dpuf

Sep 09, 2014 | Whirlpool Duet Sport HT WFW8400TW 3.7 Cu....

1 Answer

Why does my whirlpool frontloader stop in the middle of a cycle and read f 02


Repairing the F02 error code can usually be done without ordering parts. Tools needed to repair your whirlpool Duet F02 error code are towels and a quarter inch socket.
Tip the washer back at a 45 degree angle. On the bottom panel there are three or four screws, with the screws removed the panel will slide down and off. With the lower access panel now removed you will have access to the washers drain pump clean out.
With the water already bailed from the washer you can twist the filter head counter-clockwise to remove. Twisting the filter head counter-clockwise will loosen filter so it can be pulled out.
With the filter out clean and install it back into washer.
Run a quick cycle to ensure the washer is back up and running and the F02 error has disappeared. If the error comes back, it may require you to clean the drain pump filter again.
If you require a new drain pump motor, you can purchase the part from the link below.
- See more at: http://www.appliancerepairlesson.com/2011/03/12/how-to-fix-whirlpool-duet-error-code-f02-duet-sport-error-f02-fix/#sthash.PuGd0iuQ.dpuf

Sep 06, 2014 | Whirlpool Washing Machines

1 Answer

My whirlpool duet washer had a F02 code now it won't pump water


Repairing the F02 error code can usually be done without ordering parts. Tools needed to repair your whirlpool Duet F02 error code are towels and a quarter inch socket.
Tip the washer back at a 45 degree angle. On the bottom panel there are three or four screws, with the screws removed the panel will slide down and off. With the lower access panel now removed you will have access to the washers drain pump clean out.
With the water already bailed from the washer you can twist the filter head counter-clockwise to remove. Twisting the filter head counter-clockwise will loosen filter so it can be pulled out.
With the filter out clean and install it back into washer.
Run a quick cycle to ensure the washer is back up and running and the F02 error has disappeared. If the error comes back, it may require you to clean the drain pump filter again.
If you require a new drain pump motor, you can purchase the part from the link below.
- See more at: http://www.appliancerepairlesson.com/2011/03/12/how-to-fix-whirlpool-duet-error-code-f02-duet-sport-error-f02-fix/#sthash.PuGd0iuQ.dpuf

Aug 24, 2014 | Whirlpool Washing Machines

1 Answer

Whirlpool front loader duet hd washer gets stuck in the wash cycle with the error code of F02. What is F02 mean?


Whirlpool Duet front-load washer F02 usually means it is taking over 8 minutes for the washer to sense that the rinse or wash water has drained, which either means that the drain/filter is clogged or the pressure switch/tube is clogged (causing both the washer to over-fill with water and not sensing that water has drained).

To clear out the drain/filter, tilt the washer backwards a little for easier to the kick-plate and support the front bottom with a wood block or similar, remove the front kick-plate's (3) retaining screws and swing the kick-plate up out of the way. The filter drain is behind the white knob in the center, be prepared with something to catch any remaining water and lots of towels to soak up any spills, and turn the knob counter-clockwise to remove the filter.

Jan 11, 2013 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Door won't open on whirlpool duet washer frontload


Press the cancel button twice to cancel the error code. There should be an error code flashing -- for example 'F02'.

Nov 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My washer is displaying an "F02" message. What does this mean?


If the drain time exceeds eight minutes, the water valves are turned off
and “F/02” is flashed. Press PAUSE/CANCEL two times to clear the
display.
NOTE: After four minutes the “Sud” error will be displayed, then four
minutes later the “F/02” error code will be displayedfc2323f.jpg3830f06.jpg 600f261.jpg
Your tech sheet? GHW9150PW0 Tech Sheet # 8182277 Rev #

Duet service manual and codes

Was this solution helpful? 7a83e56.gif

Rate it or hate it:
5a197a7.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 09, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet Mdl GHW9150PWO Washer stops


HI. this code represents a Long Drain issue.

If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Oct 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Our Whirpool duet washer will not spin, gives us the SUDS and F02 message and now the door is locked.....suggestionss?


k now the washer beleives that it is full of water.
pour about 3/4 cup of veg oil in the dispenser. and start the unit.. this will get rid of the suds error.
F02 means long fill.. and the water level has not satisfied the computer for 40 secs. check water connections. making sure they are fully open.
to open the door if it does not unlock, in the dispenser there should be an ODD colored line, five that a tug and the door will pop open

Oct 09, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Model GHW9150PW0 shows code F02. The washer did nor complete the spin cycle and water was left in the tub. How do I get access to the pump. How do I remove the panels. Thank you


If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed.

Press PAUSE/CANCEL twice to clear the display.

NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.

Potential Causes

• Check the drain hose and make sure it is not plugged or kinked
• Check the electrical connections at the pump and make sure the pump is running.
• Check the drain pump filter for foreign objects
• If the above does not correct the problem replace the pump

Jun 22, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet ht wouldn't start


remove the lower front panel,3 screws,side up and off,there is a tech sheet inside on the panel that should help you ,let me know what you find-mike

Oct 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Brad Brown

Level 3 Expert

18455 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...