Hi there. For Masterbuilt 3-prong power cord, you can visit http://mastebiult.com where you can find the nearest authorized parts dealer in your area. Regards.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Grady, The link below is a short youtube video on how to change a 3 prong power cord to a 4 prong power cord... I hope it helps.... CHEERS.. https://www.youtube.com/watch?v=np5o1Zi6Gc4
There's a ground strap wire (green/yellow) attached to the dryer cabinet and connected to the center terminal where the white neutral wire of the power cord is connected. Disconnect this ground strap wire and remove the 3-prong power cord from the terminal block taking note where the wires are connecedt to. Connect the 4-prong power cord in the same way same wire colors of the 3-prong cord are connected to the terminal block. Connect the ground strap wire to the remaining fourth wire (green/yellow). Just do the reverse when converting 4-prong to 3-prong. The link below might enlighten you further on this matter.
Hi there. For Masterbuilt 3-prong power cord, you can visit http://mastebiult.com where you can find the nearest authorized parts dealer in your area. Regards.
It is the same power cord as use for you PC, NEMA5-15P to IEC C13 (3-PRONG USA 15amp plug to Euro IEC C13 FEMALE 3-PRONG RECEPTACLE), you should be able to get it at local PC/TV repair shop.
User manual: http://www.viewsonic.com/assets/003/5269.pdf
Hi Jay Middle terminal is White and goes to the "L" shaped prong Red and Black go to the Flat prongs (Doesn't matter which) Round prong to cabinet Ground. There may be a strap from the White lug to the cabinet. This must be removed for the 4 prong plug arrangment. Eric
Do you have your power cord wired correctly? Please read through the link thoroughly and confirm the wire color coding and the placement of where you have the wires terminated. I hope this helps you. Let me know if you have further questions.
×