Default settings factory reset - Epson DFX-9000 Matrix Printer

that model number is no good.
if a PC it is see below if a printer see 2nd post.
Restore the factory-set defaults (printer page 92)
why not post what this is first.
a PC a printer, what?
and what the problem is first.
be wise to do that.
PC's have more that 10 resets inside,
facts.
resets and recoveries and fresh OS reloads and more.
lots more.
tell what you have and what's up first.
win
and use the full model numbers not 1/2

Resetting by 'Software'
Resetting to the Factory Default Settings from the interface:

1. Go to the interface of your camera by typing in the camera's IP address in the browser. Example: http://192.168.1.253/
2. Click Setup, Maintenance, Default Reset, Reset to default and then click Execute.

Resetting by 'Hardware' Resetting to the Factory Default Settings using the Control button:

1. Disconnect the 'DC IN' cable from the camera.
2. Hold down the 'Initial Set' button.
3. Reconnect the power adapter using the 'DC IN' jack while holding down the 'Initial Set' button. Release the 'Initial Set' button after 5 seconds. (The reset could take up to 180 seconds)
4. When the 'Status' indicator changes to green, the process is completed and the camera had a Factory Default Reset.

http://electronicshelponline.blogspot.com/

Use reset button.

I do not know what is your router type. Therefore I put here more options. Select what is valid for you:

• Linksys

Linksys Official Support Resetting your router and changing the router...

• TP-Link

How to reset TP LINK products to factory defaults

• Netgear

Restoring NETGEAR home router to the factory default settings Answer...

• Zyxel

wish to restore the factory settings for my Zyxel router
or
ZyXEL PK5001Z Factory Reset

• Asus

How to Reset the Asus RT N66R
or
How to Reset the Asus WL 500g

• D-Link

http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it
or
http://www.dlink.com/uk/en/support/faq/modems/dsl-modems/dsl-series/how-do-i-reset-my-adsl-router-back-to-factory-default-settings

• Belkin

Resetting the Belkin router to factory default settings using the Reset...

Resetting the Printer to Factory Default

Settings

Resetting the printer to factory default settings can be useful when

you are troubleshooting with the printer.

CAUTION Resetting factory defaults clears the page buffer, removes downloaded

fonts and macros, and returns all print menu settings to factory defaults.

To reset the printer to factory default settings

1 Press MENU until RESETS MENU displays.

2 Press ITEM until RESTORE FACTORY SETTINGS displays.

3 Press SELECT until the following message appears:

RESTORING

FACTORY SETTINGS

This message displays until the printer has completed the
initialization

Resetting the Printer to Factory Default

Settings

Resetting the printer to factory default settings can be useful when

you are troubleshooting with the printer.

CAUTION Resetting factory defaults clears the page buffer, removes downloaded

fonts and macros, and returns all print menu settings to factory defaults.

To reset the printer to factory default settings

1 Press MENU until RESETS MENU displays.

2 Press ITEM until RESTORE FACTORY SETTINGS displays.

3 Press SELECT until the following message appears:

RESTORING

FACTORY SETTINGS

This message displays until the printer has completed the
initialization

Use Default Settings If you want to return the initial language setting such as Language, Video, Audio and etc. to the factory default, do the following: 1) Press SETUP button. 2) Press / button to select Misc. 3) Press button to select Use Default Settings, then press ENTER button. 4) Press / button to select "Yes", then press ENTER button. The original setting will be restored. Screen saver : On Do you want to use default setting? Note When you reset the DVD player to the factory default, the DVD player will take 3-5 seconds to reset.

I don't believe that model has a password. You may just need the password for the network you are using. If you want to reset the unit to the factory defaults see below.

To reset defaults to the factory default settings:
1. Press .
2. Touch , then touch Printer Settings.
3. Touch , then touch Reset All Settings.
4. When you see the message, "This will reset printer settings to factory defaults,"
touch Yes.
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.

Hello Cynthia,
There are several ways to achieve this.
Reset phone
The Reset feature allows you to set your phone options back to
the factory defaults.

1. From Idle mode, touch Menu-> Settings -> Phone -> Reset phone.
2. At the "All settings reset to factory defaults. Continue?" prompt, touch Yes to reset, or No to cancel. Once your phone has been reset to its default settings for those selected options, it will restart itself in order to incorporate the new settings.

Restore phone
The Restore feature allows you to delete any user information
that has been added, in addition to setting your phone options
back to the factory defaults.

1. From Idle mode, touch Menu-> Settings -> Phone ->Restore phone.
2. At the "All settings reset to factory defaults and all user data will be deleted. Continue?" prompt, touch Yes to reset, or No to cancel.

or
Reset code
Enter *2767*3855# in phone dial.

Warning! All your data including contacts, messages etc. will be lost! Copy all your necessary data/Contacts/Messages etc. to SIM or make backup on your PC before full reset!

what is the model #?
Most netgear routers default to a username of "admin" and password is either " admin ", "password" or it is just blank. Those are the defaults unless someone changed it.
If you cant get in you can hold down the reset button on the back for 30 seconds (while it is plugged into power) and that will set it back to factory default settings then one of the above should work.
If this was a help please give me 4 thumbs up as I am trying to build up my rep on this site!