Panasonic DMR-ES45V - DVD recorder / VCR combo Remote not workin

Panasonic DMR-ES30VS DVD Recorder/VCR Universal ...

www.fixya.com > ... > Panasonic DMR-ES30VS DVD Recorder/VCR

Panasonic DMR-ES30VS DVD Recorder/VCR, universal remote related issues. Getfree help ... My remote does not work anymore. what is the code for a universal remote? Thanks in ... Question about Philips DVD & Blu-Ray Players ... How do I getremote code for GE universal remote control Need remote code? How to ...

Philips Magnavox MWR20V6 DVD Recorder/VCR Remote ...

www.fixya.com > ... > Philips Magnavox MWR20V6 DVD Recorder/VCR

Listed on the enclosed code sheet.

... and the problem is?

Seek tech support. This is not a self repairable work. Need technical skill.

¡Hola
Realmente no puedo entender el problema de los dispositivos de Panasonic. Haga el favor de volver a publicar problema de sus dispositivos un poco explicado. S?lo tienes que explicar en espa?ol. Lo puedo conseguir. Ok

Actually, you are sort of correct, in a sense, RC1 means remote command mode 1 (the default mode of your combo unit). There is one way you can try to fix this:

Remove the batteries from the remote, press any button on it to clear its existing memory buffer, then re-insert them or replace them with new ones. While unit is on (no DVDs or tapes in it), point the remote at it - press and hold 1 and ENTER/OK buttons together for 10 seconds, then release.

This should (in most cases) restore full remote command operation to your combo unit - if when you press a channel button on it, and the unit's front channel changes, the remote is now functioning as it is meant to.


The good news is this will constitute any workshop repairs or costs (except perhaps new batteries for the remote if required).

I hope this helps a bit.

I assume this combo unit has basic front panel buttons (behind the right-hand door - where the copy button is) - there should be a drive select (VHS or DVD) button stop play record. I strongly advise if you really need a remote for this model, particularly when it comes to menu/setup options, that you search various online and similar stores for one.

The cost will depend where you go and who you deal with - and if the remote is available (you can always ask Panasonic about a remote for a DMR-EZ48V even though your model may be a DMR-EZ47V - they both use the same remote (N20AYB000136 or equivalent number); they can probably tell you how to order one through them, the price, etc.

A universal remote may work, but with limited functions. If the combo unit works in general, you should not have too much trouble obtaining a replacement remote (just keep in mind the model above).

The remote may cost just over $100 but remember, this is only if you want full control of your combo unit.

Hold down the "1" and the "Enter" buttons together for about 10 seconds. This worked for me.

The disc drive motor is burned out, its junk...if you didn't finalize the discs, they're junk too unless you buy another Panasonic DMR.

TAKE BK UNDER GARANTEE