Question about Mitsubishi MSH09TW Air Conditioner

Msh-30sv Compressor won't start

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Msh 30tv

You'll need a clamp on style ammeter to check it. On the data plate of the unit, look for the "LRA" Locked Rotor Amps value. Clamp the jaws of the ammeter around just one of the large black wires connected to the compressor and try starting the unit while observing the reading on the meter. If it's close to the value on the data plate, then your compressor is indeed locked. A bad start capacitor could be the culprit too

Dec 29, 2013 | Heating & Cooling

1 Answer

What memory stick to i need for dcr-trv340e?

Go to http://www.sony-asia.com/support/resources/en_AP/html/Compatibility/MemoryStick/handycam.htm and note the first two options: MSH-128S2 used directly, and the MSH-M128N used via MSAC-M2 adapter.

Feb 18, 2012 | Sony Handycam DCR-TRV340E Digital...

1 Answer

Craftsman air compressor won't turn on. Worked fine one day then the next day won't turn on. Checked elecrtic which is good. When I turn switch on it clicks but doesn;t start

Motor start capacitor probably bad.

Oct 10, 2011 | Craftsman 3 gal. Air Compressor, 1.5 hp,...

1 Answer

My compressor on my mitsubishi msh 18nv has ceased. Is there anything I can try to fix it (eg a gentle tap with a hammer) before I spend a fortune to replace this compressor?

Sorry to inform you, you need to get a HVAc tecnision out too replace the compressor: Did a technision test the amps on the a/c unit? Why did the compressor ceaced?

Sep 20, 2011 | Mitsubishi MSH09TW Air Conditioner

2 Answers

What memory card do i need for my sj30 and where can i purchase it?

You need a Sony Memory Stick

Here's one on Amazon: http://www.amazon.com/Sony-MSH-M128A-Memory-Retail-Package/dp/B0000D8HLL/ref=pd_sim_e_1

Mar 05, 2011 | Sony CLIE PEG-SJ30 Handheld

1 Answer

My unit turns on and after a couple of minutes starts blinking and no cooling

I'd say you have a problem with your compressor. The blinking is a fault code but usually you need a service manual to tell you what is wrong.

TBH, you would most likely need to get someone to come look at it.

Feb 20, 2010 | Comfort-Aire MSH-024 Air Conditioner

1 Answer

Need a new compressor for mitsubishi wall mount MSH 17-be v2, where to buy a compressor or manual?

Try Johnstones Supply company, they are nationwide
and you can visit them online

Jan 13, 2010 | Heating & Cooling

1 Answer

My MSH 024 Air Conditioner keeps tripping off at the mains switch

FIRST TRY TO CHECK THE CIRCUIT BREAK THAT IS CONNECT TO THAT AIR CONDITION, USUALLY IS A 30 AMPS OR 40 AMPS CAPACITY, MAYBE IS BELOW THE AIR CONDITION CAPACITY AND OVERHEAT THE BREAK, OTHER WISE UR SHOULD CALL A TECHNICIAN TO CHECK THE COMPRESSOR AND THE COIL OF THE CONTACTOR

Mar 09, 2009 | Comfort-Aire MSH-024 Air Conditioner

1 Answer

Mitshubishi split muh-18nvand inside msh-18nv

-Start the unit.
-Press EMERGENCY OPERATION switch.3-minute time delay works.Test run operation operates for 30 minutes.
-Check voltage to terminal block of outdoor unit.Is there 12V DC between 2-1?
-If voltage is presenet check the wiring, compressor contactor outdoor fan motor and compressor.
-If no voltage check voltage to terminal block of indoor unit.Is there 12V DC between 2-1?
-If if voltage is present re-connect the continuity of indoor and outdoor unit connection.
-If no voltage replace the indoor electronic control P.C.
board.
-But also check the coil thermistor sensor and room air thermistor if this two is out of range it can cause the tripping of out door unit. It has the resistance of 8 to 10 k ohms at 25 deg c temp.