AKAI PLASMA TV. MOEL AKI PDP4273M

Your right there is no aerial connection to your tv I think that you should provide a cable converter with audio video out that is the only solution i think. Good day and best regards.

i can get u orginal remote

Any luck getting this fixed?Please let me know.Thank You very much!
Tyler

This sounds like a loose solder joint, or overheated component. I know this may sound like a **** question, but have you tried tapping the TV to see if it goes away? If it does, you will need a tech to re solder the loose component. I have also seen this type of line and color bleed problem, believe it or not from poor cabling or loose connections.

looks like ur screen is gone........or any other electrical problems are there.......call a service center and let it check out,,,,,,,a new screen is nearly $1000 so may a better idea to get a new tv if this is the cause

Hold The Clear Tv buttom until all 4 light flash red , then press code search at the bottom right , then the up arrow until ur tv goes off and finally record , after that u only need to press the red tv buttom to open it or close , If it doesnt open it back its because u press the up arrow after the tv was shut off so do the same thing be using the down arrow .

Akai are notorious about remote incompatibility

You can download the manual from the akai website:

http://www.akaiusa.com/

I just did a search on "pdp4273m" at the akai website.

http://www.akaiusa.com/products_detail_features.aspx?cat=VISUAL%20ENTERTAINMENT&subcat=Plasma%20TV/Monitor&productno=PDP4273M

The manual is easy to download from there product page about the plasma.

The manual is a PDF, so I hope you have something like adobe acrobat to read the file.
http://www.adobe.com/

just get that remote :)

TRY THIS BY USING YOUR REMOTE 1-PRESS BRIGHTNESS 2-PRESS FREEZE 3-PRESS MENU 4-PRESS ENTER THIS WILL TAKE YOUR TV BACK TO FACTORY PRESETS. I WENT 3 MONTHS WITH NO TV BEFORE I FOUND THIS OUT.