Question about Rothco Aquaforce Watch-combat N/a

Open Question

Setting alarm on aquaforce watch - Rothco Aquaforce Watch-combat N/a

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the alarm on model wau111a tag watch


  • Pull out the crown to the alarm setting position. The crown is located on the right side of the face of the watch. Pull the crown out until "AL", the alarm indicator, is shown on the watch. Depending upon the model of your Tag Heuer Aquaracer watch, you will either pull the crown out in the first or second position.
  • Select the hours and minuets for the alarm. Once your watch is in the alarm setting position, press the bottom right button on your watch. This will enable you to select the hours and minuets that you want to set the alarm for.
  • Set your alarm. To begin setting your alarm turn the crown clockwise until the desired hour or minutes are displayed on your Tag Heuer Aquaracer watch. If you happen to accidentally pass the alarm time, turn the crown counter-clockwise the get back to the desired alarm time.
  • Save your alarm. When you are ready to save your alarm, simply push in the crown. Once your alarm sounds, to silence it press any button on your Tag Heuer Aquaracer watch.

  • Nov 06, 2014 | Tag Heuer Link Watches

    1 Answer

    Set date on 1440 sports watch 504-t5k085


    My watch has model number 504-tsk085, labeled Timex 1440 Sports, and Timex provides the incorrect manual for it online. I wrote these instructions after careful experiment:

    Upper left button: press to switch to a stopwatch, or...

    Press and hold to enter alarm setting mode. Once flashing press again to enter time/date setting mode.
    -- you can only do one or the other without exiting the setting
    mode (time or alarm set).
    - within the setting mode you use the two right side buttons
    in obvious ways to set times/dates
    Exit setting mode by pressing upper left again

    Lower left button: light
    Upper right button (when not setting time): reveal date while pressed

    Lower right button (when not setting time): reveal alarm time while pressed.

    ALSO: WHILE lower right button is pressed you can change alarm
    on/off and chime on/off through the four possible settings by
    secondarily pressing the upper right button repeatedly.

    Mar 01, 2012 | Timex 1440 Nylon watch

    1 Answer

    How do you set the time on an Armitron 165 wrist-watch?


    Hi wtgillo,

    Hi there I see that you are in need of assistance setting time on your Armitron Wrist watch.

    I would be more than glad to give you details on how to, Please see steps below.

    • Your Armitron Watch will have Four Button on the side of the watches rim.
    • Button on the upper Left is MODE.
    • Button on the lower Left is LIGHT.
    • Button on the upper right is DATE.
    • Button on the lower right is Alarm.
    See Steps below:
    *Setting the time*

    • Press and Hold down the Mode Button til the Hours flash
    • Then push Alarm Button to set the Hours
    • Press and Hold down the Date Button till the Minutes flash, then push D/Alarm Button to set the minutes
    • After setting the minutes on your watch, Press date till you get the month flashing push Alarm to set the month
    • Press the Date again till the Date flashes, then push Alarm to set date
    • Press the Date again till the Date on your watch flashes, then push Alarm to set the date
    • After setting everything push the Mode Button again just once to set everything or finalize your settings on the watch.
    I hope that this will be of help regarding your query on how to set the time on your Armitron watch, I also included the setting of the time and date just for further details.

    Have a nice day,

    mvincentc

    Apr 21, 2011 | Armitron Watches

    1 Answer

    Do you have directions for armitron mens pro sport watch 49/1000


    Hi robinmsavage,

    I will be glad to help you with your concern regarding your Armitron Wristwatch, what exactly would you be experiencing? cause I only put info on how to set time and date on the Watch.

    Please see below steps:

    • Your Armitron Watch will have Four Button on the side of the watches rim.
    • Button on the upper Left is MODE.
    • Button on the lower Left is LIGHT.
    • Button on the upper right is DATE.
    • Button on the lower right is Alarm.
    See Steps below:
    *Setting the time*

    • Press and Hold down the Mode Button til the Hours flash
    • Then push Alarm Button to set the Hours
    • Press and Hold down the Date Button till the Minutes flash, then push Alarm Button to set the minutes
    • After setting the minutes on your watch, Press Date till you get the month flashing push Alarm to set the month
    • Press the Date again till the Date flashes, then push Alarm to set date
    • Press the Date again till the Date on your watch flashes, then push Alarm to set the date
    • After setting everything push the Mode Button again just once to set everything or finalize your settings on the watch.
    I hope that this will be of help regarding your query on how to set the time on your Armitron watch, I also included the setting of the time and date just for further details.


    Thank you for choosing Fixya,

    mvincentc

    Apr 21, 2011 | Armitron Chronograph Sport #204345BKBK...

    1 Answer

    Alarm setting I want to set an alarm to repeat daily as a alarm clock would for a g shock


    casio gshock...Setting the TimeG-Shock watches feature a digital display that is set using the function buttons on the outside of the watch face. To set the time, press and hold the the upper left ...">casio gshock...Setting the TimeG-Shock watches feature a digital display that is set using the function buttons on the outside of the watch face. ...

    Mar 10, 2011 | Casio Watches

    1 Answer

    I have an aquatech watch and don't know how to set it.


    Thank you for contactng FixYa.
    Setting the Time and Date
  • To set the time and date on your Aquatech watch, begin by pressing the "Mode" button three times to access the time setting screen. Use the "Lap/Reset" button to set the hour on your watch. Use the "Start/Stop" button to advance the numbers to reach the correct hour. When you've set the hour, use the "Lap/Reset" button to set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch.
  • Setting an Alarm
  • To set an alarm on your Aquatech watch, begin by pressing the "Mode" button two times to access the alarm setting screen. Use the "Lap/Reset" button to set the hours place, using the "Start/Stop" button to reach the correct hour. Repeat the same procedure to set the minutes for your alarm. When you have finished setting the alarm, activate it by simultaneously holding the "Lap/Reset" and "Start/Stop" buttons until the alarm icon appears. When the alarm sounds, silence it by pressing the "Lap/Reset" button.
  • Deactivating the Hourly Chime
  • Many Aquatech watch models feature an automatic hourly chime. This can be inappropriate and inconvenient in many situations. To deactivate the hourly chime on an Aquatech watch, simply press and hold the "Lap/Reset" and "Mode" buttons simultaneously. After you have correctly deactivated the hourly chime, the hourly chime indicator icon will disappear from the watch's main screen.

  • Best regards. Jewel

    Sep 18, 2010 | Watches

    1 Answer

    How do I turn off the alarm on my Armitron watch?


    I don't know whether this is what you are looking for, as the watch comes with no packaged instructions OR general support, on their website, XD,

    Nik.

    http://home.earthlink.net/~eldonenew/armitron.htm

    or

    http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html



    Armitron All-Sport Watch Instructions By Brian Walker eHow Contributor 9 Found This Helpful The Armitron All-Sport is a unisex style of watch made by Armitron that features a digital readout and four buttons around the outer dial for adjusting various aspects of the watch. It can set alarms, keeps the time as well as the date, and has a built-in backlight. Accessing and adjusting these various settings is a fairly simple process.

    Other People Are Reading


    Setting Date, Time and Alarm
    • To enter the date and time setting mode, press and hold the "mode" button, located on the top-left of the watch. Continue holding this button until the display begins to flash. This first display is the alarm setting, should you choose to set an alarm to go off. If you'd like to set the alarm, use the "alarm" button on the bottom-right of the watch to advance the hours to the desired one. Then press the mode button again; this will cycle through the minutes and seconds of the alarm to allow you to set those as well. Once you have set the alarm, you can press the "date" button at the top-right of the watch to proceed to the regular time setting. These numbers, which will now be flashing, also are adjusted by pressing the alarm button to change them. Pressing the date button again will now cycle through the hours, minutes, seconds and the date. As you continue to press the date button, the All-Sport will continuously cycle through these options; don't worry if you forget to set one, you can simply press the date button a few times until you get back to the setting you need to change. Once the alarm, time and date have all been set, you can press the mode button one more time to exit to the normal watch mode that will display the date and time.
    Using Chime and Alarm
    • The Armitron All-Sport features both an alarm and an hourly chime. The alarm function will cause the watch to continuously beep at the selected time until you turn it off by pressing a button. The chime will cause the watch to beep once every hour. You can turn both these features on and off by pressing and holding the alarm button and while holding it pressing the date button. The first time you do this, the chime will turn on and a small house symbol will be displayed on the watch face. Performing this button-pressing sequence again will turn on the alarm, which in turn displays a small clock icon on the watch face. Each successive pressing of this button sequence will alternate between the chime and the alarm, turning them either on or off.
    Backlight
    • The All-Sport also features a built-in backlight to help you view the watch in dark conditions. This light can be activated by pressing the "light" button on the bottom-left of the watch. Pressing this button is the only way to activate the light, and doing so will only cause the watch to illuminate for a few seconds at a time.


    Read more : http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html

    Jul 20, 2010 | Armitron Round Digital Sport 408089 Watch

    1 Answer

    Need help setting the alarm


    yes,I have a diffrent watch but it might still work.First you have to hold mode for 5 seconds and then the alarm will show up and you set it if it dose not work tell me.

    Mar 29, 2009 | Watches

    1 Answer

    How do i set alarm on a gap sport watch?


    For setting Time & Date...
    1. Push "MODE" button three times (change Mode to TimeSet)
    Time -> StopWatch -> AlarmTimeSet -> TimeSet -> Time ->...
    2. Flashing Second Number Digits
    3. Push "RESET" to select...
    Second -> Minute -> Hour(12hr<->24hr) ->...
    Date -> Month -> Day of Week -> Second -> ....(repeat)
    4. Use "START" to set each item...

    For setting Alarm ON/OFF
    1. Push "RESET" button then Push "START" same time...
    Alarm ON -> Alarm OFF -> ... (repeat)

    Jan 09, 2009 | Columbia All Sport Digi Watch l

    1 Answer

    Sector adv 1000 setting alarm


    key for setting time can be pulled fully (to set time) or shortly (only 0.5-1 mm) for setting alarm. then you should turn it and watch how it moves (automatic, without your turning). when it comes to desired time just push key in. the watch will automatically rewind to present time and it will re-start running.

    Apr 14, 2008 | Watches

    Not finding what you are looking for?
    Rothco Aquaforce Watch-combat N/a Logo

    Related Topics:

    120 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Rothco Watches Experts

    Janelle Schoonover
    Janelle Schoonover

    Level 3 Expert

    842 Answers

    Bruce Robin

    Level 2 Expert

    300 Answers

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Are you a Rothco Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...