Picture size wont change - Hitachi 51F500 51" Rear Projection HDTV-Ready Television

Hi, Norm,
There will be a key " P SIZE" or picture size on the remote control. Please use it to get the required size of picture you want.

Hi David,
There is key P Size on the remote control. Please use it and select the size of picture you need.

Change the image size with the 'picture size' or 'format' button on the remote. On some tv's you have to go into the menus to change the size if there's no button on the remote control.

Hi,
Follow this links and read it instruction... Changing the Default Paper Size Type and Source Settings and HP Support document HP Support Center and More Help.. HP Printer Support

Thanks,

Hello
To select the picture size using the remote control
Press "Picture Size Button" on the remote control

While the Picture Size screen is open, you can do one of
the following to select the desired picture size

Repeatedly press "Picture Size Button"

Press the corresponding Number button (0-6) while the
Picture Size screen is open

Press UPor DOWN button, while the Picture Size screen is open

Using these functions to change the picture size (i.e.,

changing the height/ width ratio) for any purpose other than

your private viewing may be prohibited under the Copyright

Laws of the United States and other countries, and may
subject you to civil and criminal liability
OK

click start control panel,display,desktop you can select a different desktop from the drop down list also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general
dpi normal size,larger size or custom settings
hope this helps

The wide button on your remote adjusts the picture size. Each time you press it you adjust the picture. If repeatedly pressing the wide button is not changing the picture size check you cable/satellite remote control. Look for the hdzoom# button. There may also be an aspect or format button. When you adjust this the picture size changes and between the Sony remote and the cable/satellite remote you should be able to come to a happy medium. If the picture size still isn't changing you might not be set to the correct resolution i.e. 1080i on your cable/satellite box. It might be set too low or you might be in the wrong input (av 1 av 2 hdmi 1 hdmi 2) etc.

Normallly, if the picture size button on the remote for the television does not achieve the desired affect, then, a cable box or a satelite box is where the change needs to be made.
For example:
A Motorola Cable box needs to be set up to go to a wide screen or zoom when an analog signal is detected.
Some Dish Network boxes have Size buttons on their remotes and also in their main menu.
It's difficult to determine the repair without knowing the types of the peripherals.
Hope this helps.

If you are using a cable box, the settings you want are in the setting menu under "format" or "display" . Typically the choices are Normal or stretch, Select stretch.
The "small picture is how the old NTSC format displays in "normal mode" on a High definition set.
While you are in the settings menu, you might want to verify that the box is set to output at least 720P if not 1080i.

www.mcveyelectronics.com