Question about Lexmark X6650 4-In-One Wireless InkJet Printer

Open Question

Document hangs in queue lexmark x6650

Prints one document good then second request will say printing but nothing happens

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: document printing hangs at 99%

same problem. everytime i restarted my pc and deleted the printed files from control panel/printers/lexmark x5150.

Posted on Jan 07, 2008

Ad
slywil091

Sylvester Osigwe

  • 112 Answers

SOURCE: Three weeks ago, I purchased a Black (No.4) and a

ok what should do is when you finish printing one page wait for some few mins before printing another page ok. that could help or unistall and reinstall your printer again and apply this method i just showed you. thanks

Posted on Jul 02, 2009

Ad
techbuster

INDIRA KUMAR

  • 5081 Answers

SOURCE: Document won't delete from printer queue after printed

Have you tried to stop the spooler service in services?

Option 1)
Click on start orb
Type in search window:
services.msc
click ok
Scroll down to Print spooler service and click on it in the right side window.
On the left side click stop the service and wait forthe process to stop .Do not close the window yet. You will have to restart it here later.
next delete the print job in the printer queue then restart the spooler service
Resubmit your new print job.

Option 2)
If that doesn't clear it, the next step would be to stop the spooler
service as stated above
Go into windows explorer
(Print job data is collected and stored in a spool file in the spooler folder.)

It is located in:
C:\WINDOWS\system32\spool\PRINTERS

Your print job will show 2 files there Example below:
00002.SHD
00002.SPL

Delete the files located in there. There may be several of them depending apon how many print jobs you submitted. You will have to resubmit your print jobs all over again.
Next go back to services window and restart the spooler service

That will definitely fix it.

Posted on Aug 19, 2009

s_4u_11

sandip panchal

  • 535 Answers

SOURCE: I can't delete a document in the queue for

remove usb cable from the printer then try to cancel it then after switch off your printer then after trying to cancel if problem occurs then u have remover your printer driver and reinstall it

Posted on Nov 14, 2009

Testimonial: "thank you very much "

printmastert

Lexmark

  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: My printer won't print...there's a document in

    Try these steps to remove the print jobs stuck in the queue. Follow the instructions carefully:
    First, you have to stop the Print Spooler. To do this: 1. Click on the Windows logo start button. 2. Go to Control Panel 3. Open Administrative Tools 4. Open Services 5. It will pop-up a Services window. Scroll through the list and look for Print Spooler. 6. Double-click on Print Spooler, and click on the Stop button. Click on Ok button. Set the window aside.
    Second, you need to clear the print jobs in the Spool folder. To do this: 1. Click on the Windows logo start button. 2. Type Spool in the Search bar. 3. Open Printers folder 4. Delete all the files in the Printers folder. Close the window.
    Third, you have to re-enable the Print Spooler. To do this: 1. Go back to Services window. 2. Double-click on Print Spooler, and click on the Start button. Click on Ok button. Close the Services window. Click on the Windows logo start button. Go to Control Panel and open Printers folder. Refresh the page. That should clear the print queue now.
    If it still won't print, make sure to clear the print jobs in the queue again and try to reinstall the software. If you need more assistance, leave a comment and I'll get back to it. Thanks.


    Posted on Jun 21, 2010

    Add Your Answer

    ×

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    3 Answers

    My epson wf 2630 printer is in an error state I send documents to the printer from my laptop but nothing happens I can not get it out of an error state


    It is very common to encounter Epson Printer Error State Windows 10 with any Printer, the same is the case with the Epson Printers and scanners. They also confront the error due to some reasons. These error codes indicate some specific issues with your printer. One such problem is with the Epson Printer Error State Issue, the error popups on-screen, and unable your printer from working. If you encounter such an issue, you need to ensure that the printer is turned on and connected to your system via Wi-Fi or cable. Also, check the printer's ink, and make sure the cover is not open and the paper is not jammed.

    Steps to Fix Epson Printer Error State Windows 10:-

    1. Check Network Connectivity
    2. Install Proper Printer Software
    3. Connect the printer that requires troubleshooting
    4. Full blog with a guide on how to fix Epson Printer Error State Windows 10

    Epson Printer Error State Windows 10 is not resolved, this might mean there's waste within the printer's inside. Call the customer services or check this blog for a full solution.

    printer-support-3-undefined-undefined-0_19.jpg

    Dec 06, 2017 | Epson Office Equipment & Supplies

    1 Answer

    Do i need software like ocr so that the lexmark x6650 scanner can work


    If you are scanning documents for editing or saving them as PDF, you will need to install the OCR scan software. The Lexmark OCR scan software is available only on the installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center to request for one.
    If your scanner was working before, it could be just a slight communication problem. A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer (if USB connected)> reboot your pc > unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer (if USB connected). Then try to print again once the computer fully recognizes the USB connection or when the WiFi light on the printer turns solid green (if WiFi connected.).


    If that doesn't help, try the steps below:

    1. Disconnect the USB cable connecting the printer from your computer.
    2. On your computer, go to Control Panel > Printers and Faxes.
    3. Delete the Lexmark print object.
    4. Reboot computer.
    5. Re-brick your printer by pulling out the power supply - black box where the power cord is plugged into on the back of the printer, and re-plug after 30 seconds.
    6. When the printer turns on, reconnect it to the computer.
    7. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, try to scan a document again to verify that the problem is fixed.

    Nov 02, 2011 | Lexmark X6650 4-In-One Wireless InkJet...

    1 Answer

    Will not print all conections are good every thing sits ,but does not print have 9 documents pending


    Hi. You will need to clear the queue first as it will just accumulate in it if the pending documents remain. There are articles in the Lexmark website to help you remedy the problem. Just click on the links. This first link: http://bit.ly/agrrFg will help you remove or cancel print jobs in Microsoft windows. If the print jobs are still stuck in the queue, click on this link: http://bit.ly/aVuCwm and follow the instructions carefully. Once the queue is cleared, unplug the printer usb connection from the computer and plug it back in after 5 seconds. Try printing again. Good luck!

    Mar 24, 2010 | Lexmark X4270 All-In-One InkJet Printer

    1 Answer

    Printer wont print. help!!


    Hi albookristin
    I believe evrytime you tried to print, they all lined up in a queue for printing. If that is the case, you have to delete everything in the queue
    Right click on the printer folder, look under documents, and see there are documents listed. If there are few, delete all of them. In some cases, you may have to print one at a time.

    After doing all that, try to print a document. For test purposes type a one line document and try to print it.
    Hope this will work for you.
    Have a good day
    luciana44

    Nov 15, 2009 | Lexmark X2500 All-In-One Printer

    1 Answer

    My lexmark x6650 is giving me a "cannot retrieve application list" error when i try to scan from my mac. what does this mean? what do i do? jim


    You have to Open System Preferences > Print and Fax > Options and Supplies > Driver > Print Using : select a driver to use - select Generic PCL LaserPrinter > OK

    Now You can try printing a document using the faulty application, immediately after hitting Print pause the printing in the printer queue (use the printer icon which has now appeared in the dock). With this panel open hit Info > Driver > Print Using : +select a driver to use+- select your printers driver eg.Lexmark x5400 > OK > Resume

    The document should now print as normal

    Oct 11, 2009 | Lexmark X5470 All-In-One InkJet Printer

    1 Answer

    DOCUMENTS FOR PRINTING DON'T GO INTO A PRINT QUEUE


    If you mean that when you go to print a document it doesn't hang in the Windows print queue and leaves quickly, then it is because either the printer has grabbed the document into its memory or it has sent the document to what it thinks it another printer. It might also be that the drivers you are using are not set correctly or that the connection to the printer is incorrect.

    Jul 09, 2009 | Lexmark E232 Laser Printer

    1 Answer

    Three weeks ago, I purchased a Black (No.4) and a Colour (No.5) Valuepack Cartridges for my Lexmark X2690 All-In-One printer from Refresh Cartridges/UK. After installing both cartridges, I printed a Test...


    ok what should do is when you finish printing one page wait for some few mins before printing another page ok. that could help or unistall and reinstall your printer again and apply this method i just showed you. thanks

    Jul 02, 2009 | Lexmark X2690 All-In-One InkJet Printer

    1 Answer

    Printing errors


    Try printing one page at a time and see what happens. Repost!!

    Jun 15, 2009 | Lexmark X6650 4-In-One Wireless InkJet...

    1 Answer

    When printing documents from my PC documents always sent to queue


    Go to control panel, printers. Set your defaults there. You probably have spooling enabled. Uncheck it and your print job will go to the printer, rather than to spooling. Spooling is like rolling the print job up on a spool until the whole thing is processed, then unwinding it to the printer.

    Feb 17, 2009 | Lexmark X3550 All-In-One Printer

    1 Answer

    Lexmark C1150 printer doesn't print


    First I try to uninstall the printer, it didn't work, so I reinstall the the printer anyway, it worked for one print only.
    As second attempt I disconnected the printer completely, turned the PC off, and after few minutes on again. Uninstalled printer.
    Reconnected the cables again, install the printer - it works well!

    Dec 05, 2008 | Lexmark X1150 All-In-One InkJet Printer

    Not finding what you are looking for?
    Lexmark X6650 4-In-One Wireless InkJet Printer Logo

    Related Topics:

    37 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Muntejaya Ginting
    Muntejaya Ginting

    Level 3 Expert

    10422 Answers

    Cindy Wells

    Level 3 Expert

    6187 Answers

    CheckitRight
    CheckitRight

    Level 3 Expert

    1363 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...