Question about Yamaha HTR-5930 Receiver
I set up the front, center, and rear speakers to the receiver and the sound is coming out of front and center speakers but not rear. I have the front speakers connected to B and the receiver is on B setting. The wiring is ok because I set up the rear speakers to the front connectors and everything worked (stops working when plugged into surround connectors).
I had the same problem. Set the reciever on 6 channel stereo. On this setting, you should be getting the same sound out of each speaker. Isolate which speakers aren't getting sound. Now, on your speaker switch (the A/B button), select A. If that doesn't fix it, select B. If that doesn't fix it, try A and B (if you can on your reciever).
Now, when you switch back to pro-logic, make sure your a/b channel switch is in the position that worked in 6 channel stereo. Yamaha recievers have a memory, and when you switch various modes, it makes auto adjustments based on what you had set in the past.
Hope this helps
Posted on Apr 19, 2009
its not how there connected its in your settings. rehook up all your speaker connections properly,then make sure you proram the reciever to recieve fiber optic,hdmi,digital coax etc in the reciver.
Posted on May 20, 2009
LCD will display which speakers are active. And this depends on 2 things: the source signal and decoder mode.
If source signal is stereo, only front L+R speakers are used. For 5.1 signal (for example DVD over HDMI / optical/coax spdif) all speakers installed (which are not set to None) are used.
To listen to stereo input signal using all speakers, switch decoder to enhancer mode.
Posted on Mar 02, 2010
Tips for a great answer:
Nov 06, 2012 | Pioneer VSX-405 Receiver
Aug 30, 2010 | Yamaha RX-V659 Receiver
Apr 14, 2009 | Yamaha HTR-5730 Receiver
Mar 15, 2009 | Yamaha RX-V663 Receiver
Mar 08, 2009 | Denon AVR-2105 Receiver
Jan 28, 2009 | Yamaha RX-V463 Receiver
Nov 05, 2008 | Yamaha HTR-5840 Receiver
Jun 04, 2006 | Onkyo TX-SR601 Receiver
Jan 04, 2014 | Yamaha HTR-5930 Receiver
363 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: