Question about Garmin StreetPilot C330 GPS Receiver

2 Answers

Gps garmin c330

Trying to download latest updates for the system

Posted by gpsuser on

  • Anonymous Nov 05, 2007

    My garmin is needing an update for older Streets it does recognize.

    Try to download updates from site but will not except these new updates.

  • Anonymous Nov 06, 2007

    installed usb drivers cd plugedin gps to computer and got message to come here

×

Ad

2 Answers

country boy

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do i need to update my garmin streetpilot c330 or will it up date it self as i use it if so were do i get the info to do it lease send me a email at [email protected] with the info thank u

Posted on Apr 12, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

The maps are a little over $150
to get them visit
http://www8.garmin.com/cartography/mapSource/bluechartAmericas.jsp

Posted on Oct 24, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xbox 360 s console - only beeps and will not turn on - orange light on the power brick even when its disconnected from the console - it showed a red dote on the console and then nothing -also it would not...


You can try one of two solutions:

::: 1 :::
- You may need to try a different outlet, and then...:

- Unplug the adapter for like a minute or so.
- Plug it back in again, and turn on your system.
- Try now.
- Try downloading latest update.

- If need be, download your profile again.
https://support.xbox.com/en-CA/my-account/manage-gamertag-and-profile/add-remove-profile-xbox-360

- Unplug the adapter for like a minute or so.
- Plug it back in again, and turn on your system.
- Try now.
- Try downloading latest update.


::: 2 :::
- Your current adapter may be broken, and may need to be replaced.

Jan 08, 2018 | Microsoft Xbox 360 Console

2 Answers

How do i get a system update for the 3ds


Hi,

Welcome to Fixya. Please follow the step below to perform system updates

How to Perform a System Update

To get the latest available features as well as the most current enhancements to the Nintendo 3DS system's performance, we recommend downloading the most current System Update.

(For the latest information on Nintendo 3DS System Updates, click here!)

Important! Your Nintendo 3DS must be connected to the Internet to perform these steps. (How to)

What to do:
1. Turn on your Nintendo 3DS and access the System Settings by tapping the wrench icon.

2. Tap "Other Settings."

3. Tap the right arrow three times to reach page "4."

4. Tap "System Update."

5. Tap "OK."

6. Tap "I Accept."

7. Tap "OK" to begin the update.

Important Note:

It may take several minutes for the System Update to download. If you feel the update has stopped downloading, you can safely turn off the Nintendo 3DS and repeat these steps to try again.

You can also refer on the link below.

3DS system updates

Thanks for using Fixya.

Dec 17, 2011 | Nintendo 3ds Handheld Game Console- Cosmo...

1 Answer

Downloaded latest update, now completely locked.


Try a hard reset- Hold the power button down for 30 to 40 seconds when the unit is on- you should hear 2 beeps and the system will reset to factory settings. Hope this helps you out man

Apr 05, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

My laptop which has windows 7 on it does not recognize mmy dongle


there is an update for windows 7 and dongles at the husqvarna viking website.

From Husqvarna Viking website -

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

link to latest Dongle Drivers - http://vsmsoftware.net/downloads/HASP/HASPUsersetup.exe

Husqvarna Viking - http://www.husqvarnaviking.com

If you are still unable to get it to work, visit your local authorized Husqvarna Viking dealer. Most stores have staff who are eager to help but you might want to call for an appointment

Good luck..

Feb 13, 2010 | Husqvarna Designer I

1 Answer

Loaded autodigitizing onto our new computer with Windows 7. Everything loaded just fine but when I try to open program it does not recognize the dongle.


There is an update for dongles and windows 7.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com


When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Feb 09, 2010 | Husqvarna Designer I

2 Answers

My wii unit does't work. There is nothing but a black screen.


Hi.If the power light is green or orange and your screen remains blank, follow these steps.

1. Completely power down your system by pressing the power button for 10 seconds. If that doesn't work, unplug the AC Adapter from the Wii for a moment, then plug it back in.

2. Make sure your Wii console has the most current Wii system menu. Download the latest update, and then test your Wii console to determine if the problem has been resolved. If you continue to experience this issue, there is a problem with the Wii console and it will need to be repaired by a certified Nintendo service tech.


SYSTEM UPDATE

If your Wii console is currently connected on-line, you can download the latest Wii System Update by selecting the "Wii System Update" button from Wii System Settings menu. Downloading the latest Wii System Update will add the most current features to your Wii console. If you already have the latest update, on-screen messaging will indicate so after the Wii console searches the available Wii System Updates.

Oct 23, 2009 | Nintendo Wii Console

1 Answer

My PS3 system won't install updates


please try:
  • restoring your system, in system settings menu .
  • re-updating the system via an USB Storage Device (download the latest update from Playstation Site)
  • re'installing CoD files.

Jul 25, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

PS3 Call Of Duty World At War - Latest System Update Error


From the home menu, select icn_settings.gif (Settings) > icn_ntwkupdate.gif (System Update), and then press the x_button.gif (X)button.

Select [Update via Internet], and then press the x_button.gif (X)button.
The system automatically searches for and finds the latest version of the update data.

Download the update data.

If a new version of the system software is found, an update is necessary. Press the x_button.gif (X)button to start downloading the update data.Follow the on-screen instructions to perform the update.

Confirm that the update was successful.After the update has been completed, go to icn_settings.gif (Settings) > icn_ps3_systemsettings.gif(System Settings) > [System Information]. If the [System Software]field displays the version number of the update, the update wassuccessful.
WARNING:
  • Do not turn off the PS3™ system during an update. If anupdate is cancelled before completion, the system software may becomedamaged, and the system may require servicing or exchange.
  • During an update, the power button on the system front and PS button of the controller are inactive.

Jun 22, 2009 | Dmm Call of Duty: World at War

1 Answer

My PS3 wont even start the latest system update, COD WAW (Error)


First try to update the PlayStation software itself and then update the COD.
Due to specs of PS3 soft none of updates will allow background download. and make sure that your internet connection is uninterrupted, I sugest u to use wired connection rather than wireless, and while update is in progress try to keep all other internet connection requiring equipment offline for smoother process.

Update me about your progress

Good luck

Jun 22, 2009 | Dmm Call of Duty: World at War

1 Answer

Need to know where I can get driver download.


Possible causes:
1)The Operating System on the computer might not support the Plug & Play feature or need latest system updates.
2)The USB port or PCI slot on the computer might be faulty.
3)Extension cable (if being used) that connects the USB adapter and the computer might be faulty.
4)There is no driver support for the Operating system.
Symptoms:
1)LED will not light up on the adapter.
2)Found New Hardware Wizard does not come up.
Resolutions:
1) Make sure you meet the minimum system requirements for the adapter and have the latest updates on the computer.
2)Use the latest driver for the adapter. Latest drivers link is mentioned below.
3)Try a different USB port or PCI slot on the computer.
4)Try another device and check if it gets detected.
5)Try to connect the adapter directly to the computer without using an extension cable.
6)Try restarting the computer or try adapter on a different computer.



Open the below link and try to download the latest version of the driver http://kb.netgear.com/app/answers/detail/a_id/747

May 18, 2009 | NetGear WG311T 802.11g/b (wg311tge)...

Not finding what you are looking for?
Garmin StreetPilot C330 GPS Receiver Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

John Egan
John Egan

Level 2 Expert

85 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...