Question about Motorola Mobility RAZR V3c Cellular Phone

1 Answer

My phone is silent during video playback

I can't hear any sound during video playback, it used to work, but now doesn't.  All other sounds work fine on the phone e.g. ringtones, alerts etc.
If doing master reset is the answer I have no idea what pin number to put in for a reset.

Posted by SusanV on


1 Answer


  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Try six 0's...if wrong code..try four...hope it helps

Posted on Oct 28, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My iPhone 5c won't ring

Does the phone plays music without any problem? If you play music to hear it on the loud speaker, and there is no sound, then you probably have a hardware failure, (bad speaker). But if you get to listen to the music, then try this next steps to see if it can be fix.
  • From the iPhone's home screen, tap the Settings app.
  • In Settings, tap Sounds in the third group of options.
  • In Sounds, swipe down to the Sounds and Vibration Patterns section. In that section, look forRingtone. That displays what you have set as your current iPhone ringtone. Tap it to change that.
  • This menu shows you the list of all the ringtones available on your iPhone.
    To get new ringtones, tap the Store button in the top right corner. This will take you to the ringtone section of the iTunes Store where you can stock up on new ringtones.
  • If you choose not to buy new ringtones, but instead use the ones loaded on your phone, the first set of options in the Ringtones section are ones that you bought from the iTunes Store or created using another app and have synced to your iPhone. The ones below the divider came pre-installed on the iPhone.
    Alert Tones, farther down the screen, aren't ringtones exactly. They're alert sounds normally used for alarms and other notifications, but they can be used as ringtones, too.
  • When you tap on a ringtone, it will play so you can preview it and decide if it's what you want. When you've chosen the ringtone you want to use as your default, make sure it has the checkmark next to it. Then tap the Sounds button in the top left corner or click the Home button to go back to the home screen. Your choice is saved automatically.
  • Now, whenever a call comes in, the ringtone you just selected will play (unless you've assigned individual ringtones to callers, that is. If you have, those ringtones take precedence). Just remember to listen for that sound, and not a ringing phone, so you don't miss any calls.
  • Mar 13, 2014 | Cell Phones

    2 Answers

    HOW DO I SET THE RINGBACK TONES? or go to and make your own.

    Jan 10, 2010 | LG enV Touch VX11000 Cell Phone

    1 Answer


    this s bcoz of other music files for the ringtones i guess...may be that files might have got corrupted...jus try to update u r softwre for u r mobile and try it sir...then it will work for sure...plz reply if u have further problems!!!!

    Jul 30, 2009 | Sony Ericsson W910i Cellular Phone

    1 Answer

    On the LG VU CU920, how do you set ringtones as message alerts?

    After going through the manual and talking to an AT&T rep, I found that it is not possible to set your own ringtone as a message alert tone. You can only use your own ringtones for calls and ringer ID's. We're stuck with the 10 pre-loaded rings for the message alerts. :(

    Jun 02, 2009 | LG Vu CU920 Cellular Phone

    1 Answer

    Can hear no sound during any form of playback

    mybe she turnd off the sound try to turn it back up, on the side there are these buttons that go up and down, click on the one that goes up.. hope this helps

    May 27, 2009 | Samsung Eternity Cell Phone

    1 Answer

    Volume Problem Motorola w385

    perhaps you may try if you haven't already to go into settings>sounds>and from there you will be able to see what you have your ringer volumes and other stuff set up. be sure to check ringtone type, volume, and alert. This should be able to help you. Then it depends on What ringtone you have set for them. I created a voice note and used it as a ringtone and for some reason it stopped working and now when my mama calls it just beeps letting me know I missed a call. Even though the other voice notes work fine as ringtones. I haven't changed it yet.

    Jan 24, 2009 | Motorola Mobility W385 Cellular Phone

    2 Answers


    Even though the phones profile is not set to silent. the volume on the standard profile could be switched off ! go into the profile settings to check that the volume for your current profile is switched on and up. if the problem persists, seek help from Sony Ericsson And/or your Mobile Phone Carrier

    Oct 23, 2008 | Sony Ericsson K800i Cellular Phone

    8 Answers

    Setting ringtones as you text message alert tones

    You CAN set a song as your text alert tone. Here are the steps:
    1- Go to: Settings> Profiles>
    2- Select your options (e.g. normal, vibrate and ring, etc....)
    3- select Options> Customize (2)>
    4- Highlight "Message Sound" and select Options> Customize (2),
    5- Then browse to the folder your song or sound is in (e.g. audio) and select the file you want to use and save it.

    I noticed that the songs have to be under 30 seconds to use as any type of alert tone for calls or texts.

    Hopefully this helps.

    Aug 10, 2008 | LG Shine KE970 Cellular Phone

    2 Answers

    Samsung E900

    Sound settings Use this menu to customise various sound settings.
    Incoming call
    Use this menu to select a volume level and alert type
    for incoming calls.
    Alert type: specify how you are to be informed of
    incoming calls.
    Ring tone: select a ringtone for the call ringer.
    Volume: select a ringer volume.
    Keypad tone
    Use this menu to select the tone that the phone
    sounds when you press a key.
    Message tone
    Use this menu to set up the ringtone for incoming
    Menu functions
    Tone: select one of several message tones.
    Alert type: specify how you are informed when a
    message comes in.
    Repetition: specify how often the phone informs
    you of a new message.
    Power-on/off tone
    Use this menu to select the melody that the phone
    sounds when it is switched on or off.
    Slide tone
    Use this menu to select the tone that the phone
    sounds when you open or close the phone.
    Silent mode
    Use this menu to set how the phone acts to alert you
    to a specific event in Silent mode.
    Extra tones
    Use this menu to customise additional tones for the
    Minute minder: set the phone to beep every
    minute during an outgoing call to keep you
    informed of the length of your call.
    Connection tone: set the phone to beep when an
    outgoing call is connected to the system.
    Alerts on call: set the phone to beep when you
    receive a new message or when the time for an
    alarm comes during a call.
    Indicative tone: set the phone to beep when a
    pop-up window displays.

    Apr 28, 2008 | Samsung SGH-E900 Cellular Phone

    1 Answer

    No sound during playback

    you need to check whether sound is ok tru av out leads ,or is it problem with no sound while trying to play back in camera as have seen a few of these with internal speakers going faulty.if you try it tru av leads you should have sound if this is the case

    May 09, 2007 | Samsung SC-L906 Camcorder

    Not finding what you are looking for?
    Motorola Mobility RAZR V3c Cellular Phone Logo

    Related Topics:

    55 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Motorola Mobility Cell Phones Experts

    Lawrence Oravetz

    Level 3 Expert

    10543 Answers

    Vernon Taylor

    Level 3 Expert

    6185 Answers


    Level 3 Expert

    6740 Answers

    Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides