Question about Necchi 3102 Mechanical Sewing Machine

1 Answer

Necchi 3577 I need a new presser foot release? What is the number for the part

Posted by smarsh4087 on

Ad

1 Answer

Badcat Besseya

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 268 Answers

Dunno. Talk to the local sewing machine repair shops, or send a photo of what's going on (or not going on) to Ron Anderson at A1 Sewing -- he's always been helpful, has a good reputation for speedy service. [email protected] Depending on the age of this machine, you may be looking for a parts machine to rob.

Posted on May 24, 2014

Ad

2 Related Answers

trudyday

  • 2 Answers

SOURCE: Attaching fit button-hole foot?

Just pull down on the original metal foot. It will snap off and then you can snap on the button hole foot. Good luck!

Trudy

Posted on Dec 02, 2008

Ad

SOURCE: I need a new presser foot release. Do you know the number of the part? For a Necchi 3577 machine

try checking with
a1sewingmachines.com

Posted on Jan 26, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instuctions on using different presser foot for ja nome schoolmate


Please add a comment with the specific model of Janome Schoolmate sewing machine.

Fpr the Janome Schoolmate S-3015, make sure that the needle is fully up and raise the presser foot. Then press the red button on the back of the presser foot holder to have that foot drop off. Set the pressure dial to 3 before attaching the new presser foot. For snap-on feet, align the pin of the presser foot (the horizontal bar in the middle of the foot) under the presser foot holder. Lower the presser foot holder (using the presser foot height lever) until it locks onto the foot.

For the zipper foot, you need to fit the rear pin on the foot into groove at the back of the presser foot holder. Then lower the presser foot holder onto the zipper foot.

These are shown on page 11 (14 of the PDF) of the manual. You can download the manual here: http://janome.com/en/machines/sewing/schoolmate-s-3015/ . The direct link to the manual is http://janome.com/siteassets/support/manuals/school-models/schoolmate3015.pdf .

For the S-7330, you need to again raise the needle and the presser foot. Press the lever towards (it moves slightly up, not down) the presser foot holder. Then line up the pin on the foot under the presser foot holder and lower the presser foot holder onto the foot so that it locks. This is also in that sewing machine's manual, here: http://janome.com/siteassets/support/manuals/school-models/inst-book-s-7330esf.pdf . See page 14 (18 of the PDF).

I hope this helps.

Cindy Wells

Dec 21, 2016 | Sewing Machines

1 Answer

Tension on the side does not release the cotton when machine is stopped, making it difficult to pull out the job.


Be sure to always RAISE the Presser Foot when threading the machine or when removing fabric. When threading or removing the fabric, try raising the needle to its highest point. Raising the presser foot releases the tension disks. When the presser foot is down, the tension disk is engaged and will not release the thread.

..

May 23, 2016 | Sewing Machines

2 Answers

How do I reset stitching I can only sew 11 stitches at a time I have to release Foot pedal each time


if turning the machine off/on again doesn't clear the machine then it needs to be checked

Jan 24, 2016 | Sewing Machines

1 Answer

How to attach free motion foot


Most free motion feet attach like the other feet.

It is creating "thread nesting" also called birdnesting. Could be several things:
1) make sure before you thread the upper thread, RAISE the presser foot so the thread will seat properly in the tension disks
2) drop your feed dogs before you begin to free motion
3) your free motion quilt foot, when lowered, should not rest on the fabric. (Be sure you are lowering your presser foot when you want to stitch!) You should be able to move the quilt sandwich easily under the presser foot. If the foot applies any pressure to the fabric, you may need to release the presser foot pressure (consult your manual). Or you are using the incorrect presser foot for your machine.
4) If none of the above, you need to tighten the upper tension AND
try this method before beginning to free motion stitch:

How and Why to Bring up the Bobbin Thread

...

Aug 09, 2015 | Sewing Machines

1 Answer

I have a 9960 singer machine and am trying to use the buttonhole presser foot for the first time and I can not get it to sew T


the buttonhole foot snaps on to the presser bar, there's a little lever at the back of the presser bar that releases the foot, then put the buttonhole foot down on the needle plate & use the presser foot lifter (number 11) to lower the presser bar down onto the buttonhole foot & you'll hear a click sound when it snaps on & make sure to use the buttonhole lever(number 31) because the machine won't sew a buttonhole unless that lever is pulled down.

Apr 26, 2012 | Singer Sewing Machines

1 Answer

Cannot turn the balance wheel - new machine to me. Pfaff 1222E


You have to lower the presser foot by one click to release it from bobbin winding mode. This mode is the same as needle down while presser foot is up so you can turn your work when it needs to go a different direction.

Nov 14, 2009 | PfaFF Sewing Machines

1 Answer

How to connect the walking foot for ls-2125i? I have removed the snap on presser foot. Unscrewed the leg so I could screw on the foot. The white piece to the right does not fit on my screw so it just...


Turn power switch to "0"
raise the needle to highest position by turning the wheel toward you(counterclockwise) and raise the presser foot lever
release the foot by raising the lever located at the back of the presser foot assembly
place a different presser foot on the needle plate so that the bar on the presser foot is in line with the slot on the shank
lower the presser foot lever and fix the presser foot onto the shank. If the p foot is in the correct location the bar will snap in you should hear a click or snapping sound let me know if this helped thanks! amy

Jun 24, 2008 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

How to put on presser foot "p" to embroider


Not shure you can embroider on an MC4000, i think this is only a sewingmachine.

But to change presser fot:

If it a "snap on" foot, when foot lifted, press the "button" on the back of the needle bar (on the bottom) this would release the presser foot.

If is a large foot, you have to unscrew the screw on the left side of the needlebar, and change the whole foot.

Jun 21, 2007 | Janome Memory Craft 4000 Sewing Machine

Not finding what you are looking for?
Necchi 3102 Mechanical Sewing Machine Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...