Grasslin timer wiring

If it's warm that's all you get, I have one and it's worthless, I have to hug it our have it between my knees with a blaket arounf me and the heater.

http://waterheatertimer.org/pdf/Digi-20-EM-1STAEEMR1.pdf
Attach photo? ... contact Grasslin UK

Ordinary digi-20, the new version is Tactic 371
http://www.grasslin-controls.co.uk/tactic37x.html
http://waterheatertimer.org/pdf/Grasslin-Cross-Reference.pdf
Crossover wiring should be similar
Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

It works both ways if you are home it will give a constant heat , but is it safe in your place to leave it on while you are out .
Once they are hot they should cut out on the thermostat thus costing less to run .

Even though there is power to the heater there is no heat coming from it??

Here is a link to an Owner's Manual for a Dimplex Model that is similar to yours. They all function just about the same way.You can downbload & print the manual if you so desire.

http://www.dimplex.co.uk/assets/product_instructions/Dimplex_Oil_filled_Column_Radiators_UK-Issue_0_H27a.pdf

Hope this helps you.

Emily, if you live in the USA, contact Dimplex Technical Service 888-346-7539 for that information, as well has getting a replacement Owners Manual.

Sadly, the short answer is "No, not safely". Because, repairing it won't solve the problem of why it started leaking in the first place.

Sorry, I wish I had better news for you.

oil smells funny when its hot you heater is porous needs to be replaced

pins IN = timer ON
pins OUT = timer OFF
Slide-switch must be pushed to right for timer to work
If dial is not rotating, wiring is incorrect (see below for wiring)
__________________________________________


Grasslin and Paragon both offer multiple-gang timers.

Grasslin manual says:
" For example, to turn lights ON at 5:00pm and OFF at
11:00pm, leave inward the 18 trippers between 5 and
11 on the "pm" side of the dial.

Link to Grasslin manual

Wiring timer:
Timer black goes to Hot wire
Timer red (or blue) goes to Load
Timer white goes to Neutral (if no neutral, then connect to bare ground)
If timer dial does not rotate, black and red wires are reversed

I have baxi combi boiler genesis 80 and grasslin timer need to no what wires go were there are 4 wires coming out the timer red and brown together white and blue the timer is internal one can you help