Windows Mobile Symbol Find WLAN error

I would recommend contacting Motorola Solutions

portal motorolasolutions com

Mark
Motorola Mobility Support

Check wlan antenas inside unit

Dont worry about that. Anyhow the connection is handled through Fusion software and not windows settings. Icon on the today screen in the right down corner.

The scanner engine/output can be used only by one application. If a second application is trying to access the scanner, while in use. The error message will come.
Please check if there are more applications running in background. Usual MC9090 applications with scanner drivers are Telnet, Datawedge, Rapid Deployment and custom software. Exit one of the application or try to exit all of them. Start your scanning application again, no error should appear now.

Hello,

unfortunatley if your device is preconfigured for 1d only you will not beable to scan or decode 2d barcodes. Which configuration of the mc55 do you currently have? if you can provide me with this information i can let you know if it is possible or not.

Hello, Datamatrix is 2D Symbology. Actually this MC55 is a model with 1D Laser Scan engine. The laser cant scan 2D barcodes, therefore he is not decoding the datamatrix barcode.
You would need an MC55 with an 2D Imager or with Camera to scan 2D Barcodes.

Have the same problem when a DataPhone application was installed bevore. After disabling the application the WLAN device is not working any more !
Do you already have a solution ?
ciao,
Peter

sounds like it's not aware of the wireless network.

Rebooting while an ActiveSync connection is made can cause Adapter Unavailable to be reported after the reboot is complete until either ActiveSync is connected again, or the date is manually changed.

You may need to replace the scan engine - I can help you out with this (or any other issues you may be having).
Contact me if you need anything:
Ian
DC Solutions
[email protected]