I have a 4 line RCA Model 25423/24 and when I am on the phone it sometimes disconnects the conversation. How does call timer work?

Model?

On a model I just repaired here's what I found:

Model: 110.69422801
Kenmore Electric

No heat. although sometimes it had heat for a short time. Suspected that the heating element was faulty (i.e. cracked heating coil). Nope. Checked hi and lower thermostats and both were good. Took apart timer controller. Found that the contacts inside were worn/burnt. Item is designed to fail. Slightly bent one of the contacts to make better contact and it is working. Ordered new timer/controller ($45 including shipping from "One Appliance" on line). Easy to replace. ALWAYS disconnect the power when servicing!!!

Try these first and let me know
Intercom does not function correctly
• Make sure line 1 is connected properly and common to all phones on the system.
• Make sure all phone ID’s (station numbers) involved have been assigned.
Transfer does not function correctly
• Make sure receiver phones (stations) have same line connected.
Intercom indicator turns red and green alternately
• The station address needs to be re-assigned due to a duplicate station address in the system. See “Changing the Phone ID (Station Address)”.
Good luck,
Lee

Tork timers are each a bit different depending on voltage and model number.

Each timer has a model number on inside of timer door.

1) Add a comment with model numbers for each timer, and voltage you are working with, and I will post the conversion wiring.

2) Also look up your model number and wiring diagram on following link.
http://waterheatertimer.org/Tork-timers-and-manuals.html

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

http://www.rca4business.com/products/pc/pdf/instruction-book/25414RE3.pdf
Manual for the 25414RE3-A Corded 4-Line RCA Executive Series Phone.


Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jerry_779afc81ec0a7712

Your old phone my have been for a digital phone line. The new phone only works on traditional telco analog. There are adaptors that your phone company has to make the line analog.

If it works sometimes, then it might be a problem with the phone or the phone line itself.

If it never works at all, then it's a problem with the services that the phone company has enabled/disabled on the line.
If that's the case, call your phone company's repair line and explain the situation. They can check to confirm that the message waiting indicator service is provisioned on the line, or add it if it's not.

you might have your phone connected to a fax machine. also sometimes cordless phones pick up other talk.

Disconnect the all lines and power
Remove battery of the headset
Put battery back in
Connect phone line
Connect power cord

if on 1 and rings on line 2 which line is cut off?? 1 or 2??
if line 1 then you have a cross connection if its line 2 then you have a centrex problem and thats the phone company.

i want how frequently it occurs if it occurs always or sometimes like 1 in 10 times like that and which country you are who's ur provider