Abrsvcs HELP still out there?
Sorry about the delay, I did not see this posting.
The other speaker configs utilize the surround processing section. In stereo, the surround processor is bypassed. Based upon your brief description, I would think that the surround processing section is producing DC voltage which is detected by the output section forcing the unit into protect mode. This is not a problem that is easily diagnosed remotely. One thing to chech, if you can, is the power regulators on the surround board. Make sure that the solder connections are good. If they are OK, then I would suggest that you get a detailed estimate from a local service shop. Report the results here and we'll work through the actual repair.
Dan
×