No heat stopped heating all the rest work just no heat

faulty heating blankets cannot be repaired and are a source of fires in beds
best junk it and get a new one

Laura, check if the fan is working. Also check coolant levels.

Check out the element,wires and the switch

1. The safety over temp switch has tripped. some are resettable with a pushbutton some are crimped in place, and are replaceable.

Check the circuit breakers for the dryer first. If one trips without the other one 240 volts will stop the heat element but will allow the rest of the machine to work.

There is a small silver rod situated in the flame at the last burner. This rod tells the board the flames are lit. Clean it in place with a piece of sandpaper or emory cloth and see if that doesnt solve your problem

hi! if rest of stove works, then the fuse/circut breaker is o.k. most likely
cause will be a bad heating element or the control on top. you can get
parts with your model# and then repair it ,or have to call the repair person!

Hi in side the case on the left hand side there is a reset looks like a flat pieceof metal push this it will make a loud click this should reset heat , turn heater off first

you may have aflaulty ground on your vehicle, check for good chassis and engine ground, replace relays and fuses as nessesery

What you are saying the microwave stop work like heating,but but the clock counts down.If it is stop heating then there is a rest on or near the magtrogron.Once it cools down it start back heating.Open and close the door will reset power to the magtrogen{sorry about the spelling].Look for loose connector,or replace the click zon it should have a small red buttom on it.