How do I Program my Uniden Bearcat BC60XLT

Trying to program codes in old scanner - The RadioReference.com Forums

forums.radioreference.com > ... > New User / Getting Started Forum

Jun 1, 2009 - 4 posts
I have an old Uniden Bearcat model:bc60xlt-1. I just created an account on radioreference and hopefully you guys can help me out, the ... uniden barcat bc60xlt
7 posts
Mar 17, 2013
The Betty Bearcat starter frequency guide?
3 posts
Feb 22, 2009
Analog Police/Fire Frequencies
9 posts
Sep 14, 2007
Uniden Bearcat BC60XLT-1
10 posts
Dec 18, 2004
More results from forums.radioreference.com

UNIDEN BC60XLT-1 USER MANUAL Pdf Download.

www.manualslib.com > Brands > Uniden Manuals > Radio > BC60XLT-1

The ERROR message usually indicates that you've tried to program a frequency outside the scanner's tuning range. The BC60XLT top tuning range is the 512 MHz band, so you cannot tune any 800 MHz frequencies. For further information you can download and print the factory manual, at no cost, here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Bill B.
Listening in since the 60's

The best programming instructions for your scanner are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Hi, my name is John. Press MAN. then enter the channel you want to program the frequency in. Press MAN ,enter the frequency, then press the E button. ...Get the frequencies you need here, www.RadioReference.com... hope this was helpful....Rate this solution on the four thumbs-up.......John

You can download and print the operating manual for the BC60XLT here:

http://www.uniden.com/pdf/BC60XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

To program the majority of non-trunking Bearcat scanners,\:

- Power the scanner ON
- Press MANUAL to stop scanning
- Enter the channel # to program followed by MANUAL (OR just press MANUAL repeatedly to advance to the desired channel).
- Enter the desired frequency, including the decimal point.
- Press E (ENTER)

If these steps don't work with your scanner, please provide your model number and I'll get back to you with specifics.

Bill B

To program a known frequency into your BC60XLT:

1. Press MAN
2. Enter the channel number to program (1 -10)
3. Press MAN
4. Enter frequency, including the decimal point
5. Press RVW to confirm the frequency

Repeat the sequence for other channels

To find active frequencies in your area, and a lot of other useful scanning info, visit

www.RadioReference.com

Need the manual for your scanner? You can download/print it here:

http://www.uniden.com/pdf/BC60XLTom.pdf

BillB

You'll need to program the radio frequencies into your scanner before it will scan . For a list of frequencies in Anoka County CLICK HERE .
For specific programing instructions for your UNIDEN refer to your owner's manual. They will give you a step by step instruction on how to program the frequencies into your scanner memory (If you need a manual, CLICK HERE
...be sure to select the scanner option on their pull-down menu.
THEN when you have the radio frequencies stored into your scanner, you'll be able to press scan and away you go.
Be sure to adjust the squelch just high enough to eliminate the static...turn the squelch counterclockwise until you hear loud static, then turn Clockwise just enough to silence static...
Let us know if you still have trouble.

how do I program bc60xlt handheld scanner

i am having trouble programing frequencies into my scanner i need help!!!!!!!!!!!!!!!!!!!