Dell 3300MP Multimedia Projector Logo

Related Topics:

A
Anonymous Posted on Jan 22, 2014

3300mp turns off after warming up

Projector warms up, then immediately cools down and starts the cycle over again.

5 Related Answers

seerads

  • 77 Answers
  • Posted on Apr 04, 2008

SOURCE: Dell 3300MP Projector

my advise is to get a new one or try ebay - i got my dell 3300mp NEW in box for under $400 - and have looked at other projectors there are very good deals on ebay but make sure you read the entire listing

Ad

Anonymous

  • 1 Answer
  • Posted on Aug 02, 2008

SOURCE: No lit / projected image even with a new bulb!

Wish I knew! I have the same problem on a 3400mp.

Anonymous

  • 1 Answer
  • Posted on Mar 11, 2010

SOURCE: Hello, My company owns a 3300mp projector, we

I had the same problem exactly. But when I removed the bulb and put it in a working projector it was fine. So now where do I go.

Anonymous

  • 1 Answer
  • Posted on Nov 26, 2010

SOURCE: Dell Projector 3300MP will not pick up a signal from laptop

anyone got an answer here??? i got same issue

Anonymous

  • 442 Answers
  • Posted on Mar 26, 2011

SOURCE: I have dell 3300mp,when I

The main fan that cools the lamp is mostly high speed when the unit is running. when it shuts down it slows the fan down, until it stops in standby. So the noise is only really loud when it is showing a picture.

try setting the fan to eco mode (slower running) and see if the noise is acceptable. If it is still too loud then you will have to replace it. Have a look at the fan and see if any of the plastic blades are missing.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have dell 3300mp,when I turn the power on it makes a very loud noise. It does not make the sound in standby or cool down. It does work and display a signal okay, but it is very loud. Sound like a fan?,...

The main fan that cools the lamp is mostly high speed when the unit is running. when it shuts down it slows the fan down, until it stops in standby. So the noise is only really loud when it is showing a picture.

try setting the fan to eco mode (slower running) and see if the noise is acceptable. If it is still too loud then you will have to replace it. Have a look at the fan and see if any of the plastic blades are missing.
0helpful
1answer

Netbook gets stuck "cycling" between shutdown and restart

go to the powermanagement in the control panel. In it check the settings to turn off system when i press, or shutdown the pc after 30 min change it to never, and turn harddisk off to never. and remove the system from hibernation
0helpful
1answer

When I turn on my EP7120 it starts to warm up and then the 2 warning lights come on automatically. (Red bulb and overheating light) I turn it off and let it cool but when I turn it on the red lights come...

Is the cooling fan working? (If not, then that's the problem).
Check that the intake grid for cooling is not blocked with dust and that it has adequate room to draw in air.
0helpful
1answer

Difficult to start again after warm up engine.

give the engine a minute or two to cool down before turning it off. This cool down period allows oil to circulate and cool down the bearings in the turbo. If you shut off the engine immediately after hard driving, the oil can gum up around the hot bearings and create problems down the road.
Hope this helps

Thanks for using Fixya
Have a nice day!
0helpful
1answer

Dell 3300MP Projector

my advise is to get a new one or try ebay - i got my dell 3300mp NEW in box for under $400 - and have looked at other projectors there are very good deals on ebay but make sure you read the entire listing
3helpful
2answers

New lamp/ LAMP FAILURE

how did you get the cover off and was it the top or bottom cover?
0helpful
1answer

Sharp Notevision 6 XG-NV6xU

reset the lamp hours on your projector
0helpful
3answers

No lit / projected image even with a new bulb!

Let me add...

I had one 3300MP and removed/replaced the bulb to dust off as it was overheating. There is a small metal like switch that resets the bulb replacement (physical switch - take a good look) -- This helped to reset the first time I did this, but doesn't reset the hours on the chip.

However, since this bulb was problematic for me, I have done this a couple of times and since has stopped powering the bulb now. So, thinking it was the bulb, I replaced the bulb, -- No good... So, thinking it was the projector, I bought a new/refurbished one on ebay -- tested the NEW bulb - NO GOOD. now I have TWO PROJECTORS, THREE BULBS and NOTHING THAT WORKS...

WHAT AM I DOING WRONG?
Not finding what you are looking for?

61 views

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...