Conair Professional Ceramic Hair Straightener - Black Logo

Related Topics:

Posted on May 31, 2009

My conair straightener won't heat up

I turn on my straigtener and the light turns on but it won't heat up anymore. I have only had had it for a few months so it's still in good condition. What should i do? same thing!

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 3 Answers
  • Posted on Jul 03, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 03, 2009
Answers
3
Questions
0
Helped
2573
Points
10

That same thing is happening to me! but iv had mine for almost 2 years...exact same hair straightener, its happening to many people! i dont know if this is the problem but alot of people wrap their cords around their straighteners (i did too) and it twists the cord that conects to the hair straightener and makes it loose. i still have not found a way to solve this problem.

i would just go out and buy a new one, and if your looking for good but inexpensive i suggest vidal sassoon. they get really hot and have many settings and many different types. mine has worked greats

just remember not to wrap the cord

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Jul 19, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 19, 2011
Answers
1
Questions
0
Helped
2218
Points
2
Ad

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jul 27, 2009

SOURCE: my conair straightener won't heat up

i have the exact same problem !

Ad

Anonymous

  • 1 Answer
  • Posted on May 06, 2010

SOURCE: my conair straightener won't heat up

me too :(

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why wont my conair flat iron straightener turn on

1. Defective switch
2. Defective heating element or control
0helpful
1answer

I just got my Infinity by conair model cs32 straightener and it will not turn on or heat up. Please help.

If you just purchased it today or up to 30 days after purchase, TAKE IT BACK!!. If you start having problems from the beginning you will possibly always have them.
0helpful
1answer

My conair infinityhair straightener just stopped heating up.it turns on but it dosent heat up.

This is a job for one with a multimeter and soldering iron. Remove the temperature knob and the plate below that. It will expose the inside of the top half of the Straightener. You will see two set of red and black wires soldered to a green circuit board. See if the soldering are intact and no wire has come loose . Now unsolder the red wires ( please note which wire goes where ). With the multimeter in the Ohms range ( X100 ) touch the probes on the red and black wires each and check for continuity. The red and black wires are two ends of the ceramic heaters. If they have failed , replace .
3helpful
1answer

My Conair Proshine Straightner won't warm up, although the light is on. How do I fix this? ... hot plates not heating and the light says its warming up but the hot plates won't heat up

Most heated hair appliances are protected by a thermistor that will fail if overheated. These are small, about 1/2" long, cylindrical in shape with a pointy end and a wire coming from each end. When they go bad, they do not conduct electricity (zero ohms on a meter). There is a three digit number on the side that is the shutoff temperature. You can get these at Radio Shack.

Don't bypass this safety device.
0helpful
1answer

When I plug it in and turn it on it doesn't heat up.

The heating element is broken. This is caused by dropping or banging the device.
0helpful
1answer

I have two irons. one if them won't turn on anymore and i noticed the light kept fading out. the light on the other one flickers and it stops working halfway through straightening. any solutions?

Most likely it is the power cord. We have the same iron and the power cord has a break in it just as it comes out of the swivel. You can turn it on and hold the power cord tight up against the swivel and it should stay on. I was able to fix it by stripping the cord down to the wire soldering and adding shrink tubing to the connection. That lasted for about 1 year and it has done it again. I may have to replace it but not sure how to take it apart.
0helpful
1answer

Moded cs327 wont turn on any more

FIRST CHECK PLUG FUSE HAS NOT BLOWN , THEN CHECK ELECTRICAL WIRE FOR ANY BURNS OR BREAKS.
0helpful
1answer

Hair straighner .

Does not seam to "light up" ?
Light goes on ??

Not heating - but the light on ??
If so - the heating element has failed..

Time for a new one I am afraid ;o(
9helpful
5answers
Not finding what you are looking for?

2,228 views

Ask a Question

Usually answered in minutes!

Top Conair Irons Experts

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Don A
Don A

Level 3 Expert

4417 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Are you a Conair Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...