Image unit reset - Konica Minolta bizhub C250 All-In-One Laser Printer

To reset the image unit counter on a Sharp MX 5070V series copier, you will need to follow these steps:

1. Turn off the copier and unplug it from the power source.
2. Locate the image unit and gently pull it out of the copier.
3. On the back of the image unit, you will find a small button labeled "Counter Reset." Press and hold this button for several seconds.
4. Release the button and reinsert the image unit into the copier.
5. Plug the copier back in and turn it on.
6. The counter should now be reset and ready for use.

It's worth noting that this is just a general instruction, please refer to the user manual or contact the manufacturer for more specific information

Black image unit motor failure. First open the front door remove the black image unit not the black toner!!!. Take the image unit and shake it so as to spread out all of the developer & toner inside the image unit along the whole length of the unit. The reason for this is as not have all of the developer/toner all at one end and the motor trying to turn with all that at one end or the other. Never store image units or toner vertically!!!!!
Now reinstall the image unit. and close the door. Opening and closing the front door will reset the machine . If it comes back good chance bad image unit.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If the unit is remanufactured or if you know how, you will have to disassembly the imaging unit and replace the fuser that blowns or simply just solder it. http://www.uninetimaging.com/downloads/technical/xerox/english/Xerox_Phaser_7400_Reman_Eng.pdf
Graphic 27.

when you replace the image unit for what ever color is the machine asking for

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Change the chip or enter in service mode and change the imaging unit life duration to long life.The copier displayed continuosly Please change the image unit,press OK and ignore.

The only way to reset the image unit drum is installing a new one. The new image unit has a fuse which once blown it resets the counter on the machine. You can call www.iteminconline.com I have their information in my ad place. They are good techs. I once called for a 7300 image unit reset and they said it was almost the same as a 2135 and they gave me this information. well goodluck.

try replacing the imaging unit with a new one not a reset imaging unit

No, the imaging unit will only reset back to zero if you replaced it.

How do you reset the imaging unit?