Question about AT&T Siemens S46 GSM Cellular Phone

Open Question

Dishwasher is stuck on pre-rinse mode


Posted by Anonymous on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is my dishwasher stuck in cycle ?

In which phase is stuck your dishwasher ?
Is it pre-wash phase, washing phase, rinse or drying phase ?


Sep 04, 2014 | Zanussi Dishwashers

1 Answer

Danby portable dishwasher ddw1899wp starts taking in water and then stops working with pre-rinse light blinking. Please help me on this issue. Any answer would be much appreciated.

If the water level sensor does not electrically shut off when the level needed is reached, the pre-rinse cycle will error out thinking that the level has not been reached. That sensor is a float device and probably needs to be replaced...

Dec 28, 2012 | Danby DDW1899WP Portable Dishwasher

1 Answer


Rinse aid setting too high or has been spilled. Turn the rinse aid dial to a lower setting or wipe the spill.
Incorrect detergent. Ensure that you use a detergent that is intended for a domestic automatic
Egg yolk. Place an extra tablespoon of detergent in the dishwasher door for pre-rinsing.
Too much detergent. Use the recommended quantity of detergent.

Feb 19, 2011 | Dishwashers

1 Answer

My dishwasher get stuck after the pre rinse with both lights ,the pre rinse and wash lights flashing,failing to go to the wash programe.

It is likely the drain pump or hose is blocked.

It might be helpful if you can provide the full model number of the candy dishwasher.

Dec 12, 2010 | Candy Dishwashers

1 Answer

My sr24h hobart undercounter dishwasher is stuck in a mode where all it does is drain water out. Will not do anything else...???

Hello There; If your unit stuck on the wash cycle and not advance to rinse cycle because the rinse water is not up to 180 degree . You've to check out the booster element and the rinse temp. I hope this will help.

Sep 19, 2010 | Hobart SR24-H Built-in Dishwasher

1 Answer

Whirlpool dishwasher stuck in rinse only mode

This problem can be fixed by pressing heated dry, normal, heated dry, normal keys within 6 seconds. There should be a technical sheet attached to the toe panel at the bottom front of the machine.

Apr 05, 2010 | Whirlpool 24 in. GU3200XTP Built-in...

1 Answer

Dial is stuck on pre rinse it will set at 60 but will jump back to pre rinse start light flashes. whirpool model ADP5540

go to sears parts direct .com you will see the part that is stuck and you can order it fromthem. they onlyneed the model#.

Mar 03, 2010 | Dishwashers

1 Answer

Dishwasher starts but after a pre rinse it won't

This sounds like the anti flood device has activated (due to some water on the bottom base of the washer) This device shuts of the water inlet and puts the pump out motor on (the sound you are hearing). Nothing els happens until the water on the base is dried and the faulty pipe / leak rectified.
The anti flood device is a small polystireene plate connected to a micro switch on the bottom of the washer.

Jan 20, 2010 | Dishwashers

2 Answers

Insufficient water to wash

Siemens and other large companies do not generally produce appliances that do not perform the intended function so it would be reasonable to assume your machine has a fault.

You will probably need expert help to cure that fault...

Feb 01, 2018 | Siemens 24 in. SE20T590GB Free-Standing...

Not finding what you are looking for?
AT&T Siemens S46 GSM Cellular Phone Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Cell Phones Experts

William Alequin

Level 3 Expert

931 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you an AT&T Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides