HP desjet F2180 blinking orange light

HP Desk Jet 940c orange light flashing

sometime the contacts on the cartridge and the pins in the cartridge holder get a bit of dirt on them and this can cause it to fail.
is it coming up with any errors?

Turn both your printer and computer off then after a few minutes turn back on. This should cancel the print job.

my f2180 hp duel printer wont print orange light flashing

I think I may have another solution. I remember some time ago going to HP to get an update for my 950c printer. I think I read something that said, "If you do not really need to download this update, don't do it." I downloaded it anyway. I think then I begin to get notices saying when my ink was getting low, usually long before it actually did. I am thinking also, the same software that gave me those readings, also may have read the color cartridge (and possibly also black) may have caused the printer to turn on the blinking resume (orange light). I then deleted the updated software and reinstalled the original software that came with my computer or old application for the printer. I restarted my computer and tried it again. The blinking light did come on at first; then I realized I had not set the printing format to black only. I also disconnected my printer both and module and power for about five minutes. Still not sure since I just did this, but the orange light is not coming on and the printer prints. LOL, I am low on black ink though.

check if your printer catrages are their in the printer. if their and the two orange lights still flashing, change the two caterages

Press the feed button. If that doesn't work, turn the printer off, wait a few seconds, and turn it back on again.

hi i,m iskandar how cant solve the trouble for flashing led resume hp deskjet f2180 thanks
i wait yor reply solution




regrads
ISKANDAR
[email protected]

busy of printing..
you may have no ink

There are 2 lights, one green and one orange.

If the green one blinks, there's no problem (As says on the manual it blinks cuz is preparin to print)

If the Orange one blinks There are 2 problems:
a) Paper Jam
b) No Paper or Paper Sensor Trapped.

Just keep reading th Owner's Manual and Say somethign if there are no solution.

Manuals Here