Sony VPL VW10HT Multimedia Projector Logo
Posted on May 30, 2009

When first turns on, large black horizontal lines make picture unwatchable.

Hi i have a VW 10ht projector with horizontal lines taking up to an hour to clear now, did you fix yours, what was problem any help appreciated. my email [email protected] I also own at Sony VPL-VW10HT. Its now almost 10 years old. When first turned on, it has terrible horizontal black lines that make it unwatchable. But within 2 minutes, it "warms up" and the lines disappear. I recently changed the lamp, since it had 2000 hours, and I hoped that the new lamp would eliminate this behavior, but unfortunately it did not. So I don't know the cause, only that the lamp is not the source of the problem. It would be great if someone knows how to fix this. Now my concern is that the problem will go on longer and longer, based on the previous post.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on Oct 05, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Oct 05, 2009
Answers
2
Questions
0
Helped
755
Points
3

From [email protected] the problem is the 3 thin ribbon wires that go to the lcd have become lose,or something else open top cover 6 screws 4 on the sides 2 on top must remove dark gray plastic piece have pic if needed Oct 4th 09

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Yellow spot on VPl x1000 Sony projector screen

one of the three polarizers is burned up It can be repaired
0helpful
1answer

Sony Projector VPL-VW 10HT 2 problems 1)The

there is a lock on the projector that needs to be removed. check the manual for the code.
0helpful
1answer

Projector

Change the bateries,clean the IR LED'S,both the remote,and the projector.Some kind's of functions was set for use before.it was not turn off or clear out of the memorys,that why u getting a not applicable message.
0helpful
1answer

Hpr4262 samsung plasma picture problem

You need to call a technician.The problem lies in the board [internal].
1helpful
1answer
1helpful
2answers

PJ458D Displays Multiple Lines and scrambled picture

White noise-the image you get when you turn your television to a channel that isn't receiving a signal. Sorry, this is an old term for on-air televisions. Its kinda the same image you get when your DirecTV signal gets scrambled during a thunderstorm.
0helpful
1answer

27V530T lines

Reset your TV, and then when it turns on, it will be all set. Not restart, RESET.

If this helps at all, please rate this a FixYa. - Evolution
0helpful
1answer

Toshiba 42 WH36 P REAR PROJECTION

You have a convergence problem. Need to replace convergence IC's.
0helpful
1answer

Toshiba 27D46 Black Screen - White Horizontal Line

I fixed the problem by taking it to a repair shop
1helpful
1answer

Viewsonic Projector Blue Vertical Line

Hi guys

This is a common Mainboard problem on Projectors , unfortunately the Board will either need repairing or replacing.

No shortcutts on this one !
Not finding what you are looking for?

539 views

Ask a Question

Usually answered in minutes!

Top Sony Office Equipment & Supplies Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Accurate TV Repair...
Accurate TV Repair...

Level 2 Expert

59 Answers

Are you a Sony Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...