Smart wash not working

Kenmore Elite dishwasher Smart Wash light blinking
Sanitize Blinking Light
Some Kenmore dishwashers have a sanitize feature; when this light blinks, it means the sanitization step failed because the hot water in the dishwasher did not achieve the desired temperature or the final rinse cycle was interrupted.

How to Reset Codes on a Kenmore Dishwasher - Hunker

https://www.hunker.com > ... > Dishwashers
Search for: Kenmore Elite dishwasher Smart Wash light blinking
More here

https://www.applianceblog.com/mainforums/threads/kenmore-elist-665-dishwasher-smart-wash-red-light-blinking-machine-not-working.29342/


https://www.google.com/search?q=kenmore+elite+dishwasher%3F+The+smart+wash+light+blinking

You posted to the category 'Dishwashers', but this looks like it is an Australian Hoover carpet cleaner?

If both lights are on and blinking than they are indicating a jam with the brush roll of your SmartWash.

Hoover SmartWash+ Automatic Carpet Cleaner FH52000

https://www.google.com/search?q=Hoover+Smart+Wash+52000.+wash+and+dry+light+are+blinking

..

Usually it is debris, food stuff, clogging the drain.

pull off the toe kick and get a flash light and see what is leaking. it might be simple to tighten a loose connection.

Hi,

Plz try the link below:

http://www.kenmore.com/kenmore-24-34-built-in-dishwasher-with-smartwash-153-cycle-1389/p-02213893000P

Hope it works ..

Thanx

https://www.google.com/search?q=Kenmore+Smart+Wash+light+will+remain+solid+for+aprox+30+seconds%2C+then+start+blinking

..

IS THE WATER TURNED ON TO THE DISHWASHER

Hi. this is a failed timer device. simply replacing the timer control module will eliminate these issues you are having.

empty out the unit and recheck the arm and rack then start it up empty and check operation --if huming but working properly --stated it does drain so motor is operating ---then its operating normal ---if arm still not working will need to remove arm and check gear or shaft for damage

sounds like it was hooked up to a coldwater line instead of a hot and your heating element in the dishwasher went bad from overload or your pc board went bad but i would check to see if it is hooked up to hot water line first..